Basic recorder configurations
, by admin, 2 min reading time
, by admin, 2 min reading time
Basic settings
After you have logged in to your recorder, you will see 4 selection menus at the top of the screen.
Watch live, here you can watch live images.
Play, here you can review images.
Logbook, here you can find all actions of the recorder.
Configuration, here you can change all settings of the recorder.
When you go to the configuration, you will quickly see a list of menus and submenus. It is best to complete the list from top to bottom. See the following checkpoints to look out for:
DEVICE SETTINGS
‘Time settings’ – ‘sync with computer time’
CAMERA SETTINGS
‘Screen settings’ - Camera name: “camera01” or “driveway”/“front door” etc.
- Change date format to 'DD-MM-YYY'
‘Schedule settings’ - Click Edit, under ‘Record type’ select motion detection. Then click on 'Select All' and click on 'Copy'. Then click 'OK'.
Now click on 'Copy to' and select all cameras.
‘Motion detection’ - Draw grid, the camera only records when motion is detected in the grid.
- 'Sensitivity' at least '1'.
- 'Turn on motion detection' must be checked.
- Press 'save'.
- Do the same for the rest of the cameras.
*The cameras now only record when there is movement
User management - Change the default password by clicking 'admin' and click 'change'.
Network settings
To be able to access your recorder from outside, ports must be forwarded in the router. You can do this by logging in to your router. The IP address of your router is the same as the Default Gateway. If your gateway is 192.168.2254, then you can use this to access your router.
The gateway differs per provider, see below for the standard settings of KPN and ZIGGO:
KPN: 192.168.2254
username: admin
password: kpn (or no password!)
Ziggo: 192.168.178.1
username: ziggo
password: wireless
At KPN you can open the ports in the DATA menu, —> NAT —> Port Mapping
Here you can open the ports for the recorder. By default, ports 8000, 80 and 554 are set for this purpose on the recorder. These must be set up in the router as follows:
At ZIGGO go to “advanced settings”. Under “Gaming and applications” you will find “Port forwarding”. Enter the information here.
You can find your external IP address at www.myip.nl. You can use this IP address to access the recorder via computer, mobile or tablet.