Hikvision access control combines all disciplines into one VMS, one software package!
In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.
You can configure groups of users and login credentials, access cards and codes. Hikvision access control from the Basic+ series supports cards and codes
MF-Y3 WhiteMifare tag suitable for access solutions with MiFare readers.Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
MF-Y3 BlueMifare tag suitable for access solutions with MiFare readers.Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
MF-Y3 RedMifare tag suitable for access solutions with MiFare readers.Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
MF-Y3 YellowMifare tag suitable for access solutions with MiFare readers.Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
Hikvision DS-K1T341CMF Face Recognition stand alone unit With the DS-K1T341CMF Face Recognition Terminal from Hikvision, there is now a low-cost access control solution with built-in tag fingerprint reader and face recognition. The unit has its own database where 1500 face patterns, fingerprints and tags can be stored. The device works with a 2MP camera and special technology that ensures that photos of authorized persons are not responded to. However, it is possible to enter persons via photo. There are connections for USB, control of an electric lock, a door contact, a tamper alarm, a button to open the door from the inside and an RS-485 connection. Power is supplied by 12V DC. Product Info
€359,00
DS-K1107AE | Access ControlImportant features Equipped with the 32-bit high-speed processor RS-485 and Wiegand (W26/W34) protocol and OSDP protocol Built-in EM card reader module (Frequency: 125KHz) Supports tamper alarm Built-in buzzer for identifying read status Online upgrade function Watchdog design to repair itself in case an exception occurs to ensure the long life of the reader
€49,00
Pro complete door controller, 4 doors, DS-K2604Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.You can configure groups of users and login credentials, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and, as of mid-2018, faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve system security. The controller also supports offline operation and is designedwith tamper switch. DS-K2600 series door controllers support smart features such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to exit the zone before the zone can be re-entered. Anti-passback can be set across the system, even when to be applied across a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions allow you to see how long employees have been in the building. When you add the hourly rate, the system lets you know the cost right away.Overtime and absences can also be easily filtered.You can load a floor plan to easily see where the controller is located and click on the corresponding camera. Link the cameras with events so that there are video pop-ups with live images and captured images. You can watch these back right away. Specifications:Linkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, Door Magnetic×1, Door Switch×1, Case Input×2, Tamper-proof×1; Output interface: Door Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 eventsDoor controller information:- 32-bit high-speed processor- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.- Card number recognition and storage with up to 20 digits.Massive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.- Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.- Online upgrade function and online remote control of doors.- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.- Supports zone alarm input- Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-party card reader with Wiegand interface.- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;- Different indicators to show different device status- Supports time synchronization via NTP, manual or automatic method- Watchdog for performing status detection of the device.- Data can be permanently stored when the controller is turned off
€559,00
Basic+ door controller, 1 door, DS-K2801Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.You can configure groups of users and login credentials, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions allow you to see how long employees have been on the premises. When you add the hourly rate, the system lets you know the cost right away. Overtime and absences can also be easily filtered.You can load a floor plan to easily see where the controller is located and click on the corresponding camera. Link the cameras with events so there are video pop-ups with live images and captured images. You can watch these back right away. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, Door Magnetic×1, Door Switch×1, Case Input×2, Tamper-proof×1; Output interface: Door Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:- 32-bit high-speed processor- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.- Card number recognition and storage with up to 20 digits.- Storage of 50,000 events- Supports first card function, super card and super password function.- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.- Supports zone alarm input- Supports Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-party card reader with Wiegand interface.- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;- Different indicators to show different device status- Supports time synchronization via NTP, manual or automatic method- Watchdog for performing status detection of the device.- Data can be stored permanently when the controller is powered off
€260,15
Fingerprint reader module, DS-K1F820-FThe DS-K1F820-F is a USB read-in module to read fingerprints in a Hikvision access control system. The optical module used was developed by Hikvision itself. This unit is not tied to one system and can therefore be used to read fingerprints in multiple systems.Specifications:System ParametersOperation System: | Windows XP, Windows7, and Windows 10Fingerprint Module: Optical, Red BacklightResolution: 508 dpiFingerprint Template Size: 256 × 288 (pixel)Device InterfacesUSB Interface: | USB2.0GeneralWorking Voltage: | 5 VDC, 200mADimensions (L×W×H) : | 100mm × 48mm × 35mm CPU: | 32bit MCUWorking Temperature : | -30°C to +70°C Working Humidity : 20% to 80% (Non-Condensing)
€189,00
DS-K1108MK card reader with code keys, MiFareThe DS-K1108MK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.RS-485 vs. WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485)- MiFare recognition and card reading
€109,00
DS-K1107AM Card reader MiFareThe DS-K1107AM is a card reader from the access control line of Hikvision. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.Product Info
€59,00
Sewosy PBNONCContacts NO and NC. Terminals with screw connection. Tripping force: 36V DC max/3A, Operating mode: Impulse. Operating temperature: -5 C to +55 C. IP20. Dimensions flush mount: 86x86x14mm, surface mount 86x86x46mm. Comes with surface mount box.
€49,00
Complete Pro door controller, 2 doors, DS-K2602Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.You can configure groups of users and login credentials, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and, as of mid-2018, faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve system security. The controller also supports offline operation and is designedwith tamper switch. DS-K2600 series door controllers support smart features such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to exit the zone before the zone can be re-entered. Anti-passback can be set across the system, even when to be applied across a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions allow you to see how long employees have been in the building. When you add the hourly rate, the system lets you know the cost right away.Overtime and absences can also be easily filtered.You can load a floor plan to easily see where the controller is located and click on the corresponding camera. Link the cameras with events so that there are video pop-ups with live images and captured images. You can watch these back right away. Specifications:Door controller information:- 32-bit high-speed processor- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.- Card number recognition and storage with up to 20 digits.Massive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.- Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.- Online upgrade function and online remote control of doors.- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.- Supports zone alarm input- Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-party card reader with Wiegand interface.- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;- Different indicators to show different device status- Supports time synchronization via NTP, manual or automatic method- Watchdog for performing status detection of the device.- Data can be stored permanently when the controller is powered offLinkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, Door Magnetic×1, Door Switch×1, Case Input×2, Tamper-proof×1; Output interface: Door Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 events
€449,00
DS-K1201MF, Fingerprint Card Reader MiFarePlease note: for reading fingerprints and cards you need to use the recording module DS-K1F820-FThe DS-K1201MF is a fingerprint card reader from Hikvision's access control line. The reader is designed with a 32-bit high-speed processor and includes an optical fingerprint recognition module. It communicates with the access control system via the RS-485 protocol. The reader is IP65-rated, allowing it to be used outdoors.The reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.
€199,00
Complete Pro Door Controller, 1 Door, DS-K2601Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.You can configure groups of users and login credentials, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and, as of mid-2018, faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve system security. The controller also supports offline operation and is designedwith tamper switch. DS-K2600 series door controllers support smart features such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to exit the zone before the zone can be re-entered. Anti-passback can be set across the system, even when to be applied across a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions allow you to see how long employees have been in the building. When you add the hourly rate, the system lets you know the cost right away.Overtime and absences can also be easily filtered.You can load a floor plan to easily see where the controller is located and click on the corresponding camera. Link the cameras with events so there are video pop-ups with live images and captured images. You can watch these back right away. Specifications:Linkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, Door Magnetic×1, Door Switch×1, Case Input×2, Tamper-proof×1; Output interface: Door Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 eventsDoor controller information:- 32-bit high-speed processor- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.- Card number recognition and storage with up to 20 digits.Massive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.- Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.- Online upgrade function and online remote control of doors.- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.- Supports zone alarm input- Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-party card reader with Wiegand interface.- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;- Different indicators to show different device status- Supports time synchronization via NTP, manual or automatic method- Watchdog for performing status detection of the device.- Data can be permanently stored when the controller is turned off
€395,00
Basic+ door controller, 4 doors, DS-K2804Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.You can configure groups of users and login credentials, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions allow you to see how long employees have been on the premises. When you add the hourly rate, the system lets you know the cost right away.Overtime and absences can also be easily filtered.You can load a floor plan to easily see where the controller is located and click on the corresponding camera. Link the cameras with events so that there are video pop-ups with live images and captured images. You can watch these back right away. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, Door Magnetic×4Door Switch×4Case Input×4Tamper-proof×1; Output interface: Door Switch Relay×4Alarm Relay×4Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:- 32-bit high-speed processor- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.- Card number recognition and storage with up to 20 digits.- Storage of 50,000 events- Supports first card function, super card and super password function.- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.- Supports zone alarm input- Supports Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-party card reader with Wiegand interface.- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;- Different indicators to show different device status- Supports time synchronization via NTP, manual or automatic method- Watchdog for performing status detection of the device.- Data can be permanently stored when the controller is turned off
€346,00
EM Card, DS-KEM125EM Card suitable for access solutions with EM readers.Specifications:Sensing Frequency: | 125KHz +/- 6KHzData Format: | EM-4100Memory Capacity: | 64 bitFunction: | ReadSensing Distance: | 15cmWorking Temperature : | -20 ? -- + 75 ?Dimensions (L×W×H) : | 85.5mm × 54mm × 0.8mmWeight : |
€4,90
Desktop teachable card reader DS-K1F100-D8EWith the DS-K1F100-D8E you can easily read cards with MiFare and EM frequency, among others.The module is plug&play, no drivers need to be installed.Specifications:The module supports Mifare Card, CPU, PSAM, ID Card, EM. - Card frequency: | 13.56MHz and 125KHz- Card type: | Standard IC, CPU and ID (EM) Card, MiFare- PSAM Card Cassettes: | 2 PSAM Cassettes- Protocol: | ISO 14443 Type A/B Standard and ISO 7816 Standard
€439,00
DS-K1104MK, Vandal resistant card reader with code keys, MiFareThe DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.RS-485 vs. WiegandHikvision card readers such as the DS-K1104M feature connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting options and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485- Dust and waterproof- Mifare recognition and card reading
€189,00
Basic+ door controller, 2 doors, DS-K2802Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.You can configure groups of users and login credentials, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions allow you to see how long employees have been on the premises. When you add the hourly rate, the system lets you know the cost right away.Overtime and absences can also be easily filtered.You can load a floor plan to easily see where the controller is located and click on the corresponding camera. Link the cameras with events so that there are video pop-ups with live images and captured images. You can watch these back right away. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, Door Magnetic×2Door Switch×2Case Input×2, Tamper-proof×1; Output interface: Door Switch Relay×2Alarm Relay×2Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:- 32-bit high-speed processor- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.- Card number recognition and storage with up to 20 digits.- Storage of 50,000 events- Supports first card function, super card and super password function.- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.- Supports zone alarm input- Supports Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-party card reader with Wiegand interface.- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;- Different indicators to show different device status- Supports time synchronization via NTP, manual or automatic method- Watchdog for performing status detection of the device.- Data can be stored permanently when the controller is powered off
€318,23
Hikvision DS-K1107AMK Card reader MiFare + code keysThe DS-K1107AMK is a card reader from the access control line of Hikvision which also features code keys to open a door or gate. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.Important features Features Brand: Hikvision Model: DS-K1107AMK ID settings: setting with the DIP switch on the motherboard Card reading distance: EM card: ≤100 mm (≤3.94″) Mifare card:≤50 mm (≤1.97″) Processor: 32-bit Keyboard: no keyboard (DS-K1107E and DS-K1107M) Keyboard with 12 keys (0~9, *, #) (DS-K1107EK and DS-K1107MK) Communication interface: RS-485 / Wiegand (DIP switch) Audio warning: beeper Power supply: 12VDC Power consumption: ≤2W LED indicator: power indicator; Status LED indicator Temper resistant: support Installation: Wall mounting with screws. The Corridor Box is not supported. Protection level: IP 65 Operating humidity: 10% to 90% (non-condensing) Operating temperature: -20°C to +65°C (-4°F to +149°F) Dimensions (L × W × H): 115 × 44 × 22 mm (4.53 × 1.73 × 0.87 inches) Color: Gray
€69,00
Key Features:Supports RS-485, Wiegand (W26, W34) protocol and OSDP protocolSupports reading MifareTamper-proof functionBuilt-in buzzer for status indication
€69,00
DS-K1104M, Vandal-proof card reader, MiFareThe DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.RS-485 vs. WiegandHikvision card readers such as the DS-K1104M feature connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485- Dust and waterproof- Mifare recognition and card reading
€149,00
DS-K1108EK card reader with code keys, EMThe DS-K1108EK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.RS-485 vs. WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Wiegand connection - RS-485 connection.Specifications:- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485)- EM recognition and card reading
€109,00
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"
