Wired detection
-
Jablotron JA-111M BUS magnetic detector mini
Jablotron JA-111M BUS magnetic detector miniThe Jablotron JA-111M magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations.The module communicates via digital bus. It is addressable and occupies one memory position in the control center.Product Info
€41,29
-
Jablotron JA-110P BUS PIR motion detector - ECO
Jablotron JA-110P BUS PIR motion detector - ECOThe Jablotron JA-110P is a BUS PIR motion detector designed for indoor protection. It detects the movement of an object with the temperature of the human body. The detection characteristics can be optimized through alternative lenses, such as the: JS-7904 corridor lens, JS-7906 horizontal cap lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. The alarm memory function is an optional setting, this function makes indicating and locating an alarm very easy. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€55,81
-
Jablotron SA-220 roller door magnetic contact with floor contact
Jablotron SA-220 roller door magnetic contact with floor contact Jablotron SA-220 roller door magnetic contact with floor contact.Wired magnetic contact specially designed for roller doors, garage doors etc. The garage door contact for heavy doors is a magnetic contact that secures larger doors (e.g. garages). Unauthorized opening is detected and reported to the alarm center. The garage door contact for heavy doors is primarily installed on roller, sliding and up-and-over doors. The detector consists of a magnetic contact (reed) and a magnet. These are applied in parallel to each other. The power circuit of an NC opening detector is closed at rest. When the distance between reed and magnet increases, the power circuit is interrupted and an alarm signal is given. The detector is protected against tampering. Optimal location for mounting is in the middle of the driveway. The reed contact is mounted on the ground, the magnet - at a distance of approx. 20 mm - on the inside of the door. The garage door contact for heavy doors is very well suited for surface mounting. It is absolutely water- and dustproof (IP 68). Thanks to the extremely robust housing, the detector is resistant to damage caused by running over. Product Info
€49,00
-
Jablotron JA-110ST BUS combined smoke and heat detector
Jablotron JA-110ST BUS combined smoke and heat detectorThe Jablotron JA-110ST BUS combined smoke and heat detector detects fire inside a building. The detector has different settings such as: smoke and heat, smoke or heat , smoke only or heat only. It has an alarm memory function where the LED will still be on after the alarm status is over. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides a visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€103,38
-
Jablotron Ei208W stand-alone CO detector
Jablotron Ei208W stand-alone CO detectorThis CO detector can be connected to the Jablotron 100 using the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector indicates excessive carbon monoxide concentration both optically with an LED and acoustically using a built-in siren.The detector is powered by an integrated lithium battery.Product Info
€165,06
-
Jablotron JA-111ST-A BUS combined smoke and heat detector with fire and burglary siren
Jablotron JA-111ST-A BUS combined smoke and heat detector with fire and burglar siren functionThe product serves to detect fire hazards in the indoor areas of residential and commercial buildings. The detector is not intended for installation in an industrial environment. The detector is powered via the control panel bus. When the detector is used with batteries (3x 1.5 V AA), with which it can be powered, it will continue to function as a stand-alone detector when the 12 V power supply is disconnected (EN 14604).The smoke detector has a built-in siren that signals fire and burglary alarms. This notification is taken over by all detectors in the system!The detector indicates fire danger using the built-in LED indicator and acoustic signaling.The JA-111ST-A product consists of two independent detectors - an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light. It is very sensitive to coarser dust particles present in dense smoke. The product is less sensitive to smaller particles generated by combustion of liquids such as alcohol. Therefore, the fire detector also includes a built-in heat detector, which is slower to respond, but better able to detect a fire , which generates only a small amount of smoke.Product Info
€123,81
-
Jablotron JA-120PW Bus PIR / MW motion detector
Jablotron JA-120PW Bus PIR / MW motion detectorThe Jablotron JA-120PW Bus PIR / MW motion detector is used for human motion detection in a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection security.When motion is detected in the monitored area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, is the detector sends an alarm notification to the control center.Product Info
€148,55
-
Jablotron JA-120PC Bus PIR motion detector with camera
Jablotron JA-120PC Bus PIR motion detector with cameraThe Jablotron JA-120PC Bus PIR motion detector with a color camera that takes color pictures with a resolution of up to 640 x 480 pixels.The detector detects motion within the monitored area including a visual alarm confirmation. The detector is equipped with a flash and infrared illumination for taking photos at night. The camera takes digital color photos in JPEG format during an alarm.When motion is detected, the camera takes a series of photos. The photos are stored in the detector's internal memory and transferred to the control panel in compressed format. From there, the images are transferred outside the building.Product Info
€247,59
-
Jablotron JA-110F Bus water overflow detector
Jablotron JA-110F Bus water overflow detectorThe Jablotron JA-110F Bus water overflow detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system via the BUS.Product Info
€53,86
-
Jablotron JA-120PB BUS combined PIR motion and glass breakage detector
Jablotron JA-120PB BUS combined PIR motion and glass breakage detectorThe Jablotron JA-120PB BUS combined PIR motion and glass break detector is suitable for the detection of human movement in a room and for the detection of breaking glass.This detector combines two sensors (PIR motion and acoustic glass breaking) in one housing.The detector occupies two memory positions in the system. The detector uses a PIR sensor for detection of human motion. Glass breakage is detected by a sensor GBS, which analyzes changes in pressure and sounds to detect the breaking of a glass window.Product Info
€132,05
-
Jablotron JA-110P PET, PRO Bus detector Pet Immune
JA-110P PET, PRO Bus detector Pet ImmuneThe detector eliminates the movement of small animals across the floor (up to about 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector).The detector has a pulse response and occupies one position in the system.The JS-7910 lens is used only for the standard immunity level.The detector comes with a JS-7910 animal lens with a 90° / 12 m angle.Product Info
€57,79
-
Jablotron JA-111H TRB connection module wired detector
JA-111H TRB Wired detector connection moduleThe JA-111H TRB module is an innovation of the JA-111H product. The innovation consists in reducing the size, lengthening the connecting wires to 30 cm, adding a TRB input and smaller changes in the internal settings.The JA-111H TRB module is designed to connect any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and supply it with power. This built-in module can be integrated directly into the detector. *One input of the module features a fixed sabotage signal, the second input reports an alarm signal and the third input is used to report an error of a connected device or a special "Masking" signal (for detectors with an anti-masking function ).*The module can also be used to connect a blind detector CT-01.*The module can be used to control programmable PG outputs.*It supports setting a minimum activation time for alarm activation (0.1 s - 300 s). *The detector features both status and impulse activation. *The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system.
€38,80
-
Jablotron Ei208DW stand-alone CO detector with display
Ei208DW stand-alone CO detector with displayThis CO detector can be connected to the Jablotron 100 using the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector gives excessive carbon monoxide concentration both optically and acoustically an LED and acoustic signal using a built-in siren. This model also shows concentration data on the display.The detector is powered by an integrated lithium battery.Product Info
€218,91
-
Jablotron JA-110B BUS acoustic glass breakage detector
Jablotron JA-110B BUS acoustic glass breakage detectorThe Jablotron JA-110B glass breakage BUS detector detects the breaking of glass windows or surfaces. The detector uses a dual detection technology (air pressure and sound analysis). It responds to the breaking of any type of glass. The sensitivity of the detector is adjustable. The detector communicates through the BUS of the central unit and is also powered by the BUS. The alarm memory function is an optional setting, this function makes the indication and localization of an alarm very easy. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€90,80
-
Jablotron JA-112J BUS wall button with panic function
Jablotron JA-112J BUS wall button with panic functionThe bus wall button JA-112j is designed to trigger a panic alarm or to control PG outputs (freely programmable outputs).The JA-112J has two buttons and an indicator LED, which signals activation (illuminates red/green) while pressing the button when a PG output is switched on or off. This panic/wall switch also has an optional function, namely the delayed activation of the panic alarm (where the activation can be canceled by pressing the button again). The delayed activation of this emergency alarm is signaled by the flashing of the red LED. The JA-112J button is addressable and occupies one position in the system.Product Info
€53,86
-
Jablotron JA-111H BUS module interface for wired detectors
Jablotron JA-111H BUS module interface for wired detectorsThe Jablotron JA-111H BUS module is designed to connect a wired detector to the alarm system.The module communicates a is powered by BUS from the central unit. The module is available as a PCB and can be installed in the wired detector. It provides one NC or one NO input. It allows the user to set a minimum trigger time (0.5s, 1s, 2s, or 5s)- Power supply: via the BUS of the central unit , 12V (9 - 15V)- Standby power consumption: 2 mA- Maximum standby current consumption of the connected detector: 50 mA- Dimensions: 22 x 27 x 14 mm- Safety class 2 in accordance with EN 50131-1, EN 50131-3- Environment in accordance with EN 50131-1, EN 50131-3: II, indoor- Operating temperature: -10 to 40 °C
€39,00
-
Jablotron JA-111SH Bus shock and tilt detector
Jablotron JA-111SH Bus shock and tilt detectorThe Jablotron JA-111SH Bus wireless shock and tilt detector detects shocks from, among other things, the out-of-bounds lifting of doors, windows, etc. caused by intruders trying to force, throw in, drill, or saw through to gain access to your home (property). The wireless tilt and shock detector has a simple installation procedure and uses digital signal processing. It features a memory of previous shocks. The detector is part of the Jablotron 100 security system and has two configurable modes. The shock/vibration detection mode for doors, windows, etc. can be used to indicate attempts of this type of force by passing a detection to your alarm system. The tilt detection mode can be used to indicate unwanted "tampering" with the object to which the detector is firmly attached. Consider that the intruder thinks he is being clever and disassembles the detector. This can be used for safes, artwork, etc. The detector uses a semiconductor tri-axial accelerometer with digital output. The signal processing ensures high immunity to false alarms. The detector communicates via BUS.Product Info
€78,60
-
Jablotron JA-110G-CO Connection module
Jablotron JA-110G-CO Connection module The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in a stand-alone Ei208W or Ei208DW CO detector, allowing the connection of the bus to the JABLOTRON 100 system. Product Info
€45,59
-
Jablotron JA-111H-AD BUS module for system control.
Jablotron JA-111H-AD BUS module for system controlThe Jablotron JA-111H-AD BUS module for system control is designed to be placed inside an external control device (with contact outputs) and provides a power supply for that device. The module has a status response (reports its on and off).- Power supply via BUS 12 V (9 ... 15 V)- Current consumption in standby mode * 5 mA- Current consumption for cable selection * 5 mA- Maximum allowable current of the connected control device 50 mA- Dimensions 22 x 27 x 14 mm- Class 2 according to EN 50131-1, EN 50131-3- Operating environment according to EN 50131-1: II. general indoors- Operating temperature -10 to + 40 ° C- Also complies with EN 50130-4, EN 55022
€95,11
-
Jablotron JA-111MB BUS magnetic detector mini brown
Jablotron JA-111MB BUS magnetic detector mini brownThe Jablotron JA-111MB magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations.The module communicates via digital bus. It is addressable and occupies one memory position in the control center.Product Info
€41,29
-
Jablotron JA-115P Pro Bus PIR motion detector ceiling
Jablotron JA-115P Pro Bus PIR motion detector ceilingThe product is a bus system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movement in buildings. Compared to standard motion detectors of the JABLOTRON 100 series, this detector is designed for ceiling mounting. The product is installed on the ceiling and its guaranteed detection range is 360° with a detection radius of up to 5.5 m at a mounting height of 3.5 m. The resistance to false alarms can be set to two levels. The detector has a pulse response and occupies one position in the system. For automation functions, the detection sensitivity can be increased in the activated system state. A circular spacer (PLV-P-ST) was developed as a certified accessory for ceiling-mounted detectors, allowing the bus cable to be hidden in cases where it cannot be neatly hidden in the ceiling. Product Info
€99,04
-
Jablotron JA-111M-AN BUS magnetic detector mini anthracite
JA-111M-AN BUS magnetic detector mini anthracite The Jablotron JA-111M-AN magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations. The module communicates via digital bus. It is addressable and occupies one memory position in the control center. Product specifications: - Power supply 12 V (9 - 15 V).- Current consumption in standby mode 5 mA- Current consumption for cable selection 5 mA- Dimensions 55 x 27 x 16 mm- Operating temperature -10 to +40 ° C- Complies with EN 50130-4, EN 55022 Product video
€41,14
-
Jablotron LD-81 | Water overflow detector
LD-81 | Water overflow detectorKey features:Working environment II. internalOperational temperature range -10 To 40° CAlarm condition Water floodingComplies with EN 50130-4, EN 55022To be connected directly to the control center or e.g. with JA-81m
€35,00
-
Jablotron JA-111M-GR BUS magnetic detector mini gray
JA-111M-GR BUS magnetic detector mini gray The Jablotron JA-111M-GR magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations. The module communicates via digital bus. It is addressable and occupies one memory position in the control center. Product specifications: - Power supply 12 V (9 - 15 V).- Current consumption in standby mode 5 mA- Current consumption for cable selection 5 mA- Dimensions 55 x 27 x 16 mm- Operating temperature -10 to +40 ° C- Complies with EN 50130-4, EN 55022 Product video
€41,14
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"