Wired detection
-
Jablotron JA-110P BUS PIR motion detector - ECO
Jablotron JA-110P BUS PIR motion detector - ECOThe Jablotron JA-110P is a BUS PIR motion detector designed for indoor protection. It detects the movement of an object with the temperature of the human body. The detection characteristics can be optimized through alternative lenses, such as the: JS-7904 corridor lens, JS-7906 horizontal cap lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. The alarm memory function is an optional setting, this function makes indicating and locating an alarm very easy. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€55,81
-
Jablotron SA-220 roller door magnetic contact with floor contact
Jablotron SA-220 roller door magnetic contact with floor contact Jablotron SA-220 roller door magnetic contact with floor contact.Wired magnetic contact specially designed for roller doors, garage doors etc. The garage door contact for heavy doors is a magnetic contact that secures larger doors (e.g. garages). Unauthorized opening is detected and reported to the alarm center. The garage door contact for heavy doors is primarily installed on roller, sliding and up-and-over doors. The detector consists of a magnetic contact (reed) and a magnet. These are applied in parallel to each other. The power circuit of an NC opening detector is closed at rest. When the distance between reed and magnet increases, the power circuit is interrupted and an alarm signal is given. The detector is protected against tampering. Optimal location for mounting is in the middle of the driveway. The reed contact is mounted on the ground, the magnet - at a distance of approx. 20 mm - on the inside of the door. The garage door contact for heavy doors is very well suited for surface mounting. It is absolutely water- and dustproof (IP 68). Thanks to the extremely robust housing, the detector is resistant to damage caused by running over. Product Info
€49,00
-
Jablotron JA-120PC Bus PIR motion detector with camera
Jablotron JA-120PC Bus PIR motion detector with cameraThe Jablotron JA-120PC Bus PIR motion detector with a color camera that takes color pictures with a resolution of up to 640 x 480 pixels.The detector detects motion within the monitored area including a visual alarm confirmation. The detector is equipped with a flash and infrared illumination for taking photos at night. The camera takes digital color photos in JPEG format during an alarm.When motion is detected, the camera takes a series of photos. The photos are stored in the detector's internal memory and transferred to the control panel in compressed format. From there, the images are transferred outside the building.Product Info
€247,59
-
Jablotron JA-110P PET, PRO Bus detector Pet Immune
JA-110P PET, PRO Bus detector Pet ImmuneThe detector eliminates the movement of small animals across the floor (up to about 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector).The detector has a pulse response and occupies one position in the system.The JS-7910 lens is used only for the standard immunity level.The detector comes with a JS-7910 animal lens with a 90° / 12 m angle.Product Info
€57,79
-
Jablotron Ei208DW stand-alone CO detector with display
Ei208DW stand-alone CO detector with displayThis CO detector can be connected to the Jablotron 100 using the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector gives excessive carbon monoxide concentration both optically and acoustically an LED and acoustic signal using a built-in siren. This model also shows concentration data on the display.The detector is powered by an integrated lithium battery.Product Info
€218,91
-
Jablotron JA-111H-AD BUS module for system control.
Jablotron JA-111H-AD BUS module for system controlThe Jablotron JA-111H-AD BUS module for system control is designed to be placed inside an external control device (with contact outputs) and provides a power supply for that device. The module has a status response (reports its on and off).- Power supply via BUS 12 V (9 ... 15 V)- Current consumption in standby mode * 5 mA- Current consumption for cable selection * 5 mA- Maximum allowable current of the connected control device 50 mA- Dimensions 22 x 27 x 14 mm- Class 2 according to EN 50131-1, EN 50131-3- Operating environment according to EN 50131-1: II. general indoors- Operating temperature -10 to + 40 ° C- Also complies with EN 50130-4, EN 55022
€95,11
-
Jablotron JA-111M-AN BUS magnetic detector mini anthracite
JA-111M-AN BUS magnetic detector mini anthracite The Jablotron JA-111M-AN magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations. The module communicates via digital bus. It is addressable and occupies one memory position in the control center. Product specifications: - Power supply 12 V (9 - 15 V).- Current consumption in standby mode 5 mA- Current consumption for cable selection 5 mA- Dimensions 55 x 27 x 16 mm- Operating temperature -10 to +40 ° C- Complies with EN 50130-4, EN 55022 Product video
€41,14
-
Jablotron LD-81 | Water overflow detector
LD-81 | Water overflow detectorKey features:Working environment II. internalOperational temperature range -10 To 40° CAlarm condition Water floodingComplies with EN 50130-4, EN 55022To be connected directly to the control center or e.g. with JA-81m
€35,00
-
Jablotron JA-111M-GR BUS magnetic detector mini gray
JA-111M-GR BUS magnetic detector mini gray The Jablotron JA-111M-GR magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations. The module communicates via digital bus. It is addressable and occupies one memory position in the control center. Product specifications: - Power supply 12 V (9 - 15 V).- Current consumption in standby mode 5 mA- Current consumption for cable selection 5 mA- Dimensions 55 x 27 x 16 mm- Operating temperature -10 to +40 ° C- Complies with EN 50130-4, EN 55022 Product video
€41,14