Dahua Video Intercom
-
alarmsysteemexpert.nl MIFARE proximity card
proximity card MIFARE card to be used with all 13.56MHz readers such as the Dahua and Hikvision outpost intercom set or other access control and intercom systems.
€2,90
-
Nedis RJ45 Connector CAT5 UTP Pass Through Solid 10 pieces (stiff cores)
RJ45 Connector CAT5 UTP Pass Through Solid 10 piecesFor connecting ip cameras or other network equipment RJ45 CAT5 UTP Connector| Pass Through | Solid, for stiff cores, ideal and quick to crimp with the Pass Through crimping tool. (See below at related products) Suitable for the novice DIYer! 10 pieces in package.
€4,90 €2,90
-
Dahua VTO2202F-P-S2 outdoor station, IP and 2-wire, 160gr camera, PoE
VTO2202F-P-S2 outdoor station, IP and 2-wire, 160gr camera, PoE Dahua, door station, IP and 2-wire use, 2MP WDR camera with IR light, Mechanical button, Night vision & voice indicator, 160° angle of view. Power supply via 2-wire, front plate in aluminum alloy, IP55 & IK07, surface mount and flush mount box not included, power supply via 2wire or PoE. Exclusive in or surface mount or surface mount housing with rain hood, see related products below. The VTO2202F-P-S2 is an outdoor station from the new generation of Dahua Video Intercom products. The communication of this generation of video intercom products is over the SIP protocol. This protocol ensures a good speech-listening connection and offers possibilities for integration with third parties. The appearance of the outdoor unit is modernized, vandal-resistant and IP55. The VTO2202F-P-S2 is suitable for both IP and/or 3rd generation 2-wire Intercom products. The VTO2202F-P-S2 is compatible with all Dahua Video Intercom IP products starting with firmware version 4.3. Highlights: PoE: This intercom is PoE capable. This makes it possible to supply the module with power and network connection with one network cable. This then excludes power for the door lock. 2nd Door control from secure area with the DEE1010B: The DEE1010B is a module that can be connected to the main module via RS485. This allows additional contacts to be added to the VTO2202F-P-S2 system over a secure connection. The main connection on the module is the NO/NC relay. This can be used as a 2nd door controller. Suitable for PoE and 2-wire communication: The VTO2202F-P-S2 is suitable for IP technology with power over PoE and can combine it with 2-wire communication at the same time. Push notifications in DMSS app: It is possible to receive push notifications in the DMSS app. By adding the outdoor unit to the app. With this VTO an indoor unit is not necessary. Points of attention: H.265: By default, the video compression is set to H.265, however, some indoor stations only support H.264. The compression can be changed in the settings of the VTO Lighting: The name plate of the VTO is not illuminated, this makes the name plate less readable in the dark 3rd generation 2-wire cannot be used with 2nd generation 2-wire switches: The S2 models support 3rd generation 2-wire communication. This also means that they cannot be combined with the previous 2nd generation switches. On the basis of IP, these generations are compatible with each other. By connecting both switches based on IP, mutual communication is possible. Power supply for door lock not via PoE: Feeding a door lock requires an external power supply. Sealing: The front of the outdoor unit is IP65, the back still needs to be sealed off Messages/ Notifications in DMSS may be delayed: When the doorbell rings, notifications are sent directly from the entry panel so they generally arrive quickly. But they can also be delayed. This is influenced by various factors such as internet speed on the sending and receiving side, traffic on Dahua's cloud servers and the status of Apple's and Android's notification servers. External bell/buzzer only possible in combination with VTH:without an indoor unit, this outdoor unit cannot control an external doorbell Advices: Outdoor Installation: The intercom unit is IP65 and therefore suitable for outdoor installation. It is waterproof up to 12.5 liters per minute. However, this does require the back side to be completely sealed. Too much water can have a negative effect on the operation of the outdoor unit. It is therefore advised to exercise caution when installing the intercom in direct outdoor areas where wind and rain have free play. DMSS app and push notifications for multiple users: Be careful about the number of users who will work with the app and this intercom system. In any case, the recommendation is to use no more than 5 users per push button. Also, the module is not powerful enough to send video and audio data to a large number of users at the same time, Multiple Dahua Outposts: It is possible to use multiple and different entry panels in one system. However, please note that a maximum of 1 entry panel can serve as a SIP server. The rest will be secondary. Keep the firmware versions the same: As much as possible, try to work with equal firmware versions for the indoor and outdoor units. The latest firmware can be found with the product under tab downloads.
€249,00
-
Dahua VTO2311R-WP 2MP Villa Video Doorbell WiFi PoE/12volt
Ultra-slim design.PC and ABS material make it ideal for indoor and outdoor use.1/2.8″ 2-MP HD CMOS camera.Offers two-way video call as stand alone via the free Dahua App or with indoor monitors.Video and voice messages from visitors can be monitored on the indoor monitor.Video call and unlock via app.IR illumination and auto WDR.Wi-Fi connection.IP65 rated.H.264 and H.265.Unlocking with IC card.PoE or 12-33Volt DC power supply. Product Info
€249,00 €219,00
-
Dahua VTO3211D-P2 Video Intercom outdoor station with 2 push buttons, Mifare tag reader, PoE
Dahua VTO3211D-P2 Video Intercom outdoor station with 2 push buttons, Mifare tag reader, PoE The Dahua VTO3211D-P2 is a multi-functional intercom outdoor station. This intercom has 2 push buttons for example for 2 apartments or rooms. A very wide viewing angle of 140gr and proximity tag reader for remote door or gate opening. The VTO3211D-P2 is suitable for connecting to all types of Dahua VTH indoor units. (via network cabling and switch) To receive push notifications, a good stable network connection is required for both the outdoor unit and the smartphone.Please note that this intercom must be 12volt adapter powered or via a PoE adapter. Despite the IP65 specification, moisture in the microphone and/or speaker can adversely affect sound quality. Placing the outdoor unit in a position where water can directly enter the microphone or speaker is therefore not recommended. This outdoor unit must be linked to an internal unit.
€229,00
-
Nedis RJ45 Connector CAT6 FTP Pass Through Solid 10 pieces
RJ45 Connector CAT6 FTP Pass Through Solid 10 piecesFor connecting ip cameras or other network equipmentRJ45 CAT6 FTP Single Plug | Pass Through | Solid, for stiff cores, ideal and quick to pinch with the Pass Through crimping tool. (See below at related products) Suitable for the novice DIYer! 10 pieces in package.
€4,90
-
Dahua VTH2421FB-P, Indoor station 7 inch Touch screen, black, PoE, SIP
VTH2421FB-P, Indoor station 7 inch Touch screen, black, PoE, SIPThe indoor station monitor is an essential part of the intercom system and is indispensable when it comes to configuration and use. The indoor unit alerts you when someone rings the doorbell and automatically displays the image of the outdoor unit, allowing you to open the door/gate immediately. 7 inch wall monitor with 1027 x 600 resolution Capacitive touch screen Option for short view security cameras based on H.264 Includes 8GB MicroSD card Power supply via PoE
€179,00
-
alarmsysteemexpert.nl VTM115 surface-mount housing for the entry panel
VTM115 surface-mount housing for the entry panelDahua :Surface mount box for VTO2202F(-P)129 x 95 x 28.50mm
€49,00 €39,00
-
Dahua VTH5221DW 7'' WiFi intercom door monitor
Dahua VTH5221DW 7" WiFi intercom door monitor The Dahua 7'' WiFi intercom indoor monitor features the latest technology and is designed for Dahua's IP intercom system. Ideal to use as a second indoor monitor.
€299,00
-
Dahua Video intercom set KTP01L incl. PoE switch, VTO2201F-P and VTH2421FW-P indoor station
Dahua Video intercom set KTP01L including PoE switch, VTO2201F-P and VTH2421FW-P indoor stationA professional IP video intercom kit from Dahua with IP network cable connection.This intercom comes complete (excl. cables) and consists of a 7-inch LCD monitor, an outdoor station video intercom panel with 2 megapixel camera and a metal extension housing (can be mounted directly to the wall). The video intercom comes with a free-to-use mobile app. You can use this app to call the outdoor station, as well as to open the door remotely. You also get a push notification when someone presses the doorbell. This system has an ip network cable connection, which means that all connections go through network cables. The PoE switch is included.Other features: Recording on SD card (excl). All communication is via IP network cables Possibility to connect and operate an electric door lock Video calling via the monitor or via the app Communicate with the visitor Connecting multiple indoor monitors possible IP door station: 2MP CMOS camera Mechanical button Night vision & voice indication 160° viewing angle Group call Aluminum alloy plate IP55 & IK07 Surface mounted PoE Expandable to up to 3 indoor stations IP indoor monitor: IPC monitoring Alarm integration Built-in 8GB SD card PoE What's in the package?1 x Indoor unit DH-VTH2421FW-P1 x Outpost DH-VTO2202F-P1 x Surface mount box VTM115 for outdoor unit1 x PoE Switch PFS3005-4ET-6
€589,00 €529,00
-
Dahua VTH2421FW-P, Indoor station 7 inch Touch screen, white, PoE, SIP
VTH2421FW-P, Internal unit 7 inch Touch screen, white, PoE, SIP The indoor station monitor is an essential part of the intercom system and is indispensable when it comes to configuration and use. The indoor unit alerts you when someone rings the doorbell and automatically displays the image of the outdoor unit, allowing you to open the door/gate immediately. 7 inch wall monitor with 1027 x 600 resolution Capacitive touch screen Option for short view security cameras based on H.264 Embedded MicroSD card of 8GB Power supply via PoE SD slot for 32GB
€199,00 €179,00
-
Dahua PFS3005-4ET-60
Dahua PFS3005-4ET-60 4-port PoE switchDahua, 4-Port Fast Ethernet PoE Switch, unmanaged, 4 x PoE, max 60w total, support 250m PoE transmission distanceLayer 2 switch, 4 x PoE max 60W total, 1x10 / 100 Base-T and 4x10 / 100 Base-T (PoE power supply), Port1≤60W, Port2-4≤30W, Total≤60W, Power supply: DC 48-57V, dimensions: 130mm x 85mm x 26mm
€69,00
-
Dahua VTM09R Rain Cover Surface Mounted for VTO2211G
VTM09R Rain cover surface-mounted for VTO2211GPlastic rain cover for the VTO2211G General: Colour Silver Weight 0.75 kg Water resistant IP65 Dimensions 158.2mm × 106.5mm × 35.5mm
€19,00
-
Dahua VTO2211G-WP Outpost 2MP IP65, WiFi/PoE, Card Reader
Dahua VTO2211G-WP Outpost 2MP IP65, WiFi/PoE, Card Reader Full-HD 2MP camera with a 125° opening angle Mifare card reader up to 10,000 cards Suitable for PoE 2.4GHz Wi-Fi. Using the VTO2211 as a server while connected to Wi-Fi is not recommended. Suitable for surface mounting IP65 front (The back must be sealed for outdoor use) Suitable for use without indoor station Notice: without an indoor unit, this outdoor unit cannot control an external doorbell Points of attention: WiFi: This product is also suitable for WiFi. However, it is not recommended to use this outdoor station as a SIP server while connected to WiFi. This can be done but in case of signal problems it will work through in the entire intercom system. Our helpdesk offers support for problems related to the Intercom, however, our helpdesk does not offer support for Wi-Fi problems. Stand alone:This outpost can be applied standalone as a video doorbell. That means the outpost can be directly paired with the Dahua DMSS app. SIP ServerThe entry panel can also be used as a SIP server within an intercom system. However, it is not recommended to use the outdoor unit as a SIP server when it is connected to the Wifi. The entire intercom system is connected to the SIP server. If the signal, the available bandwidth or the stability of the Wifi is not satisfactory that gives problems in the entire intercom system. IP65:The specifications indicate that this device is IP65. This refers to the front side. The back must be cemented in outdoor applications. Outdoor installation:For Outdoor installation, we therefore recommend combining this product with the plastic VTM09R rain hood. This rain hood is made of plastic. Keep in mind that this can deform a bit on a non-level surface. It should also be glued on the back side. Proprietary audio files: An addition of the 4.5 firmware is the function to upload your own mp3 audio files. This allows you to play a personalized welcome text. Please note that these mp3 audio files can only be a maximum of 20kb. DMSS app with Push notifications: This outpost has an app. See our FAQ on how to set it up: DMSS with Push notifications for Dahua intercom Card reader: The outdoor station features a card reader suitable for Mifare. It is possible to add up to a maximum of 10,000 users. SD card slot: The SD card slot in the VTO has no function for the time being.
€199,00
-
Dahua Dahua VTM07R Rain Cover Surface Mounted for VTO3211D
Dahua VTM07R Rain cover surface-mounted for VTO3211DAluminum rain cover for the VTO32xx series. General: Colour Silver Weight 0.511 kg Water resistant IP65 Dimensions 195.72mm × 114.4mm × 66.6mm
€29,00
-
Dahua Dahua VTM05R Rain Cover Surface Mounted for VTO2202
Dahua VTM05R Rain cover surface-mounted for VTO2202/2201Aluminum rain cover in gray color. General: Colour Silver Weight 0.309 kg Water resistant IP65 Dimensions 141.1mm × 101.6mm × 48.5mm
€29,00
-
Dahua Surface mount box angled 30 degrees for VTM05R Rain Cap/VTM115 Box
Mounting box inclined 30 degrees for VTM05R Rain hood/VTM115 BoxThe bracket is for indoor and outdoor use and comes without screws. Two long screws and two short screws are required for mounting. The angled surface mount box is made of Tough PLA Black and 3D printed. It is possible to hang the bracket either left or right side. This product is not an official Dahua part
€89,00
-
alarmsysteemexpert.nl DH-PFS3010-8ET-96, 8-Port Fast Ethernet PoE Switch
Dahua DH-PFS3010-8ET-96, 8-Port Fast Ethernet PoE SwitchPFS3010-8ET-96 is an 8-port Fast Ethernet switch that supports 250 meters PoE transmission over long distance. It provides 8 * 10/100Mbps PoE ports and 2 * 1000 Mbps uplink ports. The product is equipped with two transmission modes (standard / extended), which are controlled by DIP switch.Specifications: Supports IEEE802.3, IEEE802.3u and IEEE802.3X standards. MAC auto learning, aging, MAC address capacity is 2K Supports MDI/MDIX self-adaptation RJ45 port supports 10/100/1000 Mbps self-adaptation Supports IEEE802.3af and IEEE803.3at power supply standards Adopts metal enclosure Supports Hi-PoE 60W Supports DC 48-57V power supply Datasheet:
€139,00 €109,00
-
Nedis RJ45 Connector CAT5 UTP Pass Through 10 pieces for flexible cores (stranded)
For connecting Ip cameras or other network equipmentRJ45 CAT5 UTP Connector | Pass Through | Stranded for flexible cores, ideal and quick to pinch with the Pass Through crimping tool. (See below at related products) Suitable for the novice DIYer! 10 pieces in package.
€5,90 €2,90
-
Dahua DH-VTM123 Desk stand for VTH24xx
DH-VTM123 Desk stand for VTH24xDahua Desktop Bracket Size: 190mm*100mm*54mm Dip angle: 45° Desktop mounted bracket for indoor monitor
€24,95
-
Dahua VTO3211D-P Video Intercom outdoor station with 1 push button, Mifare tag reader, PoE
Dahua VTO3211D-P Video Intercom outdoor unit with 1 push button The Dahua VTO3211D-P is a multi-functional intercom outdoor station. This intercom has 1 push button intended for one room. A very wide viewing angle of 140gr and proximity Mifare tag reader for remote door or gate opening. The VTO3211D-P is suitable for connecting to all types of Dahua VTH indoor units. (via network cabling and switch) To receive push notifications, a good stable network connection is required for both the outdoor unit and the smartphone.Please note that this intercom must be 12volt adapter powered or via a PoE adapter. Despite the IP65 specification, moisture in the microphone and/or speaker can adversely affect sound quality. Placing the outdoor unit in a position where water can directly enter the microphone or speaker is therefore not recommended. This outdoor unit must be linked to an internal unit.
€219,00
-
Dahua VTNS2003B Two-wire switch
Dahua VTNS2003B-2 Two wire switch The VTNS2003B-2 is a switch for products from the new generation of Dahua Video Intercom products. The communication of this generation of video intercom products uses the SIP protocol. This protocol ensures a good speech-listening connection and offers possibilities for integration with third parties. The 2-wire technology simplifies installation and offers the possibility of connecting multiple op stations to a single cable. Plus points: Multiple devices on one 2-wire connection: It is possible with this generation to serialize multiple products from each other via the "out" port. The switches can also be connected to each other via 2 wires. However, each switch must be supplied with 48VDC separately. 2-wires for one system: Both the power supply for the indoor and outdoor stations and the data transmission goes through the same cable. This allows the stations to be placed on the same line, making 2 wires sufficient for a working system. TCP-IP network protocol: Despite the 2-wire technology, the posts just work as regular network products. This means that each post needs to have its own unique IP address. A big advantage of this is that posts connected to the this 2-wire switch can be combined with the PoE products and the 2-wire products from the previous generation. Suitable for DMSS and DSS Pro: Because the 2-wire products are simply part of the network, they can also be applied with the DMSS app or DSS Pro management software Points of interest: Not suitable for all 2-wire products: This switch is not suitable for all Dahua 2-wire intercom products. Products from older generations are not supported by this switch Maximum 2 entry panels per switch: A maximum of 2 VTO entry panels can be connected per switch. If there are more entry panels, they must be connected to the next switch. The switches can be interconnected. A maximum of 2 extensions per VTH indoor unit: A maximum of 2 extensions can be added to a VTH indoor unit. Should there be more extensions, it is recommended to connect the VTH with each other via a PoE switch. VTNS2003-B With 6 devices or less, a 48VDC power supply of 1.25A is sufficient. For 6 to 22 devices, a 48VDC power supply of 5A is recommended. Recommendations Recommended cabling: 4x0.5mm² with a maximum resistance of 4Ω per 100 meters. Maximum distance 50 meters 2x0.5mm² with a maximum resistance of 3.9Ω or less per 100meter. Maximum distance 50 meter UTP Cat5e 0.45mm with a maximum resistance of 12Ω per 100 meters. Maximum distance with 6 VTH is then 50 meters, with 12 VTH it is 30 meters. Slot control by external power supply: The power supply and control of locks and doors could in theory also be done from the switch. However, this may have a negative effect on the operation and mutual communication of the indoor and outdoor units and is therefore not recommended.
€119,00
-
Dahua PoE-based IP Video intercom KIT with 1-button outdoor station
Dahua IP Video Intercom KIT based on PoE, with 1 button outdoor unit This complete intercom system from Dahua is fully IP based and Plug and Play by the PoE function and can be viewed in our showroom in Gorinchem. Video Intercom set consisting of: 1x Dahua DH-VTO3211D-P, outdoor station 1-button with Mp camera1x Dahua DH-VTH5221DW touchscreen 7" WiFi intercom door monitor1x 6 port PoE switch The Dahua VTO3211D-P is a multi-functional intercom outdoor station. This intercom has 1 push button intended for 1 room. A very wide viewing angle of 140gr and proximity Mifare tag reader for remote door or gate opening. The VTO3211D-P is suitable for connecting to all types of Dahua VTH indoor units. (via network cabling and switch) To receive push notifications, a good stable network connection is required for both the outdoor unit and the smartphone. Despite the IP65 specification, moisture in the microphone and/or speaker can adversely affect sound quality. We therefore advise against installing the outdoor unit in a position where water can directly enter the microphone or speaker. 7" capacitive touch screen Monitor resolution 1024x600, 1 x 10/100Mbps network connection, supports up to 8 outposts, internal communication between multiple VTH monitors possible, display IPC cameras possible, equipped with SD card slot, snapshot recording at ringing or monitoring possible on SD card max. 32GB, opening door possible remotely, supports smartphone App ( Plus version), power supply via PoE switch or 12Vdc, surface mount. 6 port PoE switch (4x PoE and 2x uplink) possibility to power 4 devices of Dahua IP intercom via this switch. This IP intercom switch is directly connected to the outdoor unit and the touch screen monitor with CAT5E. In this way, you immediately have power supply arranged for these components. The router can also be connected so that you can remotely manage the intercom with the APP from Dahua.
€569,00
-
Dahua VTH5441G Indoor station, 10-inch touch screen, Full HD, internal memory 8GB SD, SIP, PoE
VTH5441G Indoor station, 10 inch touch screen, Full HD, internal memory 8GB SD, SIP, PoE10 inch capacitive touch screen Monitor , resolution 1024 x 600, 1 x 10/100Mbps network connection, supports up to 8 entry panels, communication internally between multiple VTH monitors possible, display IPC cameras possible, equipped with SD card slot, snapshot recording at ringing or monitoring possible on SD card, door opening possible remotely , supports smartphone App ( Plus version), power supply PoE or 12Vdc, surface mount.
€549,00 €429,00
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"