Basic+ door controller, 2 doors, DS-K2802
Hikvision access control combines all disciplines into one VMS, one software package!
In addition to video and intercom, this addition allows access control. The space choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very mature solution.
You can configure groups of users and login credentials, access cards and codes. Hikvision access control from the Basic+ series supports cards and codes
The DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designed
with tamper switch.
Presence functions allow you to see how long employees have been on the premises. When you add the hourly rate, the system lets you know the cost right away.
Overtime and absences can also be easily filtered.
You can load a floor plan to easily see where the controller is located and click on the corresponding camera.
Link the cameras with events so that there are video pop-ups with live images and captured images. You can watch these back right away.
Specifications:
Linkable card readers:
Wiegand readers
Input interface:
4 alarm inputs,
Door Magnetic×2
Door Switch×2
Case Input×2,
Tamper-proof×1;
Output interface:
Door Switch Relay×2
Alarm Relay×2
Uplink Communication Interface:
TCP/IP Network Interface and RS-485 Interface
Memory
10,000 cards and 300,000 events
Door controller information:
- 32-bit high-speed processor
- TCP / IP network communication, with self-adaptive network interface. Communication data is encrypted to ensure data security.
- Card number recognition and storage with up to 20 digits.
- Storage of 50,000 events
- Supports first card function, super card and super password function.
- Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, coercive card and code alarm, blacklist alarm and alarm for invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.
- Supports zone alarm input
- Supports Wiegand interface for card reader access. Wiegand interface supports W26 / W34 and is seamlessly compatible with third-
party card reader with Wiegand interface.
- Supports various card types such as normal / blocked / blacklist / patrol / guest / force / super card, etc ..;
- Different indicators to show different device status
- Supports time synchronization via NTP, manual or automatic method
- Watchdog for performing status detection of the device.
- Data can be stored permanently when the controller is powered off
