Products
Jablotron JA-110A II
JA-110A IIBesignificant features: The JA-110A bus siren is for indoor use and is designed to sound alarms as well as walk-in and walk-out delays and PG activations in the security system The siren button features programmable responses The siren communicates with and is powered by the bus Addressable and occupies one position in the alarm system Product Info
€99,03
Jablotron JA-110B BUS acoustic glass breakage detector
Jablotron JA-110B BUS acoustic glass breakage detectorThe Jablotron JA-110B glass breakage BUS detector detects the breaking of glass windows or surfaces. The detector uses a dual detection technology (air pressure and sound analysis). It responds to the breaking of any type of glass. The sensitivity of the detector is adjustable. The detector communicates through the BUS of the central unit and is also powered by the BUS. The alarm memory function is an optional setting, this function makes the indication and localization of an alarm very easy. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€90,80
Jablotron JA-110C PIR with photo camera
Jablotron JA-110C PIR with photo camera The JA-110C PIR with photo camera is used to take photos of a monitored area and transmit them to the control panel of the security system JABLOTRON 100. The taking of a picture is activated either, by the activation of a PG output, or by a request to take a picture from the MyJABLOTRON Web Self-Service, or by another detector (through PG activation). This setting is complemented by an optional function, where pictures are taken continuously, which are stored temporarily. They are later deleted, if there is no detector activation. If detector activation occurs at any time, a number of pre-activation photos are saved, and post-activation photos are taken and also stored in memory, taking a preselected number of photos during and after detector activation. The camera is equipped with an infrared auxiliary light. The camera's ambient light sensor can activate a PG output in the system (it can be used, for example, to turn on an external IR auxiliary light). The camera is monitored and protected against tampering by a tilt detector. For outdoor use, when there is a risk of direct contact, an additional protective housing is recommended. The camera occupies one position in the system. Specifications;Power supply via control panel bus 12 V (9 - 15 V)Current consumption (idle mode/with additional IR illumination) 15 mA/150 mAPIR detection angle of the camera 75°Range of additional IR illumination max. 12 metersCamera resolution LQ 320x240; HQ 640x480 pixelsEnvironment according to EN 50131-1, IV. outdoor, generalOperating temperature range -20 to +60°C, max. humidity 75%.Ingress protection class IP65Dimensions 155 x 75 x 55 mmClassification level 2 In accordance with EN 50131-1, EN 50131-3In accordance with EN 50130-4, EN 55022, EN 50581
€214,97
Jablotron JA-110E wired control panel
Jablotron JA-110E wireless control panelThe Jablotron JA-110E is a compact wired code control panel. It can be connected to all Jablotron 100 series control panels.This compact code control panel includes an LCD screen, control buttons and an RFID reader. Integrated on the control panel are 4 buttons (A,B,C,D) that can be set to control sections or PG outputs.These functional buttons simultaneously serve as status indicators.- It communicates via a bus and is powered by this- It contains a wired input for the connection of a magnetic detector- The keypad is addressable and occupies one position in the security system- In a user-friendly menu, it provides easy operation, management of users and detectors and browsing of event history.Product InfoThis control panel can be combined with control panels from JA-101KR, JA-106KR and the JA-100KR series.
€206,34
Jablotron JA-110F Bus water overflow detector
Jablotron JA-110F Bus water overflow detectorThe Jablotron JA-110F Bus water overflow detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system via the BUS.Product Info
€53,86
Jablotron JA-110G-CO Connection module
Jablotron JA-110G-CO Connection module The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in a stand-alone Ei208W or Ei208DW CO detector, allowing the connection of the bus to the JABLOTRON 100 system. Product Info
€45,59
Jablotron JA-110I BUS section / output PG activation indicator
Jablotron JA-110I BUS section / output PG activation indicatorThe Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the central unit by BUS. It is not possible to assign it a zone. (It takes no position in the alarm system.- LED ON current consumption: 5 mA- LED OFF current consumption: 2 mA
€40,11
Jablotron JA-110N-DIN BUS DIN current output power module
Jablotron JA-110N-DIN BUS DIN current output power moduleThe Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module provides power to the relay output. It can be used, for example, to control lights, fans, etc. The relay output is programmable via the control panel.- Power supply 12 V bus (9 ... 15 V)- Current consumption during backup (relay open / closed) 5 mA / 45 mA- Current consumption for cable selection 45 mA- Rating relay (galvanically isolated) - Class II:- Maximum switching voltage 250 V AC / 24 V DC- Ohmic load (PF = 1) max.16- Inductive, capacitive load (PF = 0.4) max 8A- Halogen lighting max 1000 W DC 384 W- Minimum DC switching 0.5W- Twisted wires 2 x 1.5 mm2 max 1 x 2.5 mm2- Dimension 18 x 90 x 64 mm- Environment general indoor- Temperature, -10 to + 40 ° C- Enclosure IP-20- Complies with EN 50130-4, EN 55022, EN 60950-1 DIN rail EN60715
€119,89
Jablotron JA-110P BUS PIR motion detector - ECO
Jablotron JA-110P BUS PIR motion detector - ECOThe Jablotron JA-110P is a BUS PIR motion detector designed for indoor protection. It detects the movement of an object with the temperature of the human body. The detection characteristics can be optimized through alternative lenses, such as the: JS-7904 corridor lens, JS-7906 horizontal cap lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. The alarm memory function is an optional setting, this function makes indicating and locating an alarm very easy. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€55,81
Jablotron JA-110P PET, PRO Bus detector Pet Immune
JA-110P PET, PRO Bus detector Pet ImmuneThe detector eliminates the movement of small animals across the floor (up to about 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector).The detector has a pulse response and occupies one position in the system.The JS-7910 lens is used only for the standard immunity level.The detector comes with a JS-7910 animal lens with a 90° / 12 m angle.Product Info
€57,79
Jablotron JA-110R 80, radio module for JA-80 components
Jablotron JA-110R 80 is a radio module for communication with JABLOTRON 100 for wireless components of the JABLOTRON 80 Oasis system.
€599,00
Jablotron JA-110ST BUS combined smoke and heat detector
Jablotron JA-110ST BUS combined smoke and heat detectorThe Jablotron JA-110ST BUS combined smoke and heat detector detects fire inside a building. The detector has different settings such as: smoke and heat, smoke or heat , smoke only or heat only. It has an alarm memory function where the LED will still be on after the alarm status is over. It is possible to assign the detector to a zone and it occupies only one position in the alarm system. SMART MEMORY indication (SMI) provides a visual LED verification of an activated detector. SMI can be disabled using the code control panel.Product Info
€103,38
Jablotron JA-110T BUS short circuit isolation module
Jablotron JA-110T BUS short circuit isolation moduleThe Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of BUS wiring. It is powered through the BUS of the control panel. It can be installed in a JA-190PL enclosure. It is not possible to assign it a zone (it does not take a position in the alarm system).Product Info
€62,10
Jablotron JA-110TP, BUS-wired thermostat
Jablotron JA-110TP, BUS-wired thermostat If you are unsure if this thermostat will fit your central heating system please contact us.Control the temperature in your home with Jablotron's wireless thermostat! All you need is a room thermostat and an installed programmable output module, which we offer in a bus-mounted and wireless version. Plus, you can remotely monitor and control the temperature via the MyJablotron application. MyJablotron is the most complete, versatile and fastest App for security systems.The free app allows any end user to view and control the system from anywhere.The thermostat can also be viewed and controlled from the beautifully designed app. The thermostat is linkable Jablotron 100 system and is the ideal addition in the field of automation. Standard programmable outputs from the control panel are used to switch the heating.In the thermostat it is possible to set a weekly program.Up to 4 thermostats can be installed within a building, controlling 4 independent circuits. The product is a component of the system JABLOTRON 100, is addressable and occupies one position in the system.- Full integration into MyJABLOTRON, = information on the current status and remote control of the thermostat- Automatic switchover to the economy temperature when leaving the premises- Weekly schedule mode- Ability to enter manual temperature setting- Ability to disable it if only a minimum temperature needs to be maintained in the building- Heating suppression if a window is open- Report in case of overheating or freezing- Easy operation via telephone- Graph of temperature history- Sabotage sensor
€134,03
Jablotron JA-110Z Connection module
Jablotron JA-110Z Connection Module The Jablotron JA-110Z Connection Module is designed for branching the bus of the system JABLOTRON 100. It is protected against attack by a pair of sabotage contacts. It is delivered in a suitable JA-190PL flush-mounted box.The contact module also contains 2x4 terminal boards, which are connected in parallel and allow the interconnection of independent branches. It occupies one position in the system.
€45,59
Jablotron JA-110Z-B BUS connection module
Jablotron JA-110Z-B BUS connection moduleThe Jablotron JA-110Z-B BUS connection module is designed to join BUS wires together in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€12,37
Jablotron JA-110Z-C BUS connection module
Jablotron JA-110Z-C BUS connection moduleThe Jablotron JA-110Z-C BUS connection module is designed to join BUS wires together in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€9,51
Jablotron JA-110Z-D Multipoint bus contact module
Jablotron JA-110Z-D Multipositional bus contact module This module is designed to connect the conductors of complex bus installations of the system JABLOTRON 100. It can be divided into two independent bus branches by disconnecting sweaters.It can be installed in the junction box JA-194PL, PLV-CP-M / L or directly in the central JA-106K.Product Info
€33,01
Jablotron JA-111A BUS external siren base
Jablotron JA-111A BUS external siren baseThe Jablotron JA-111A BUS external siren base is designed for sound alarms, tones and PG output activation and deactivation. The siren communicates and is powered by the BUS of the control center. In case of power failure, the implemented power saving function will be used. Also, the siren has a built-in level so that adjustments can easily be made during installation. It is possible to assign it a zone and it occupies only one position in the alarm system.Product Info
€140,32
Jablotron JA-111H BUS module interface for wired detectors
Jablotron JA-111H BUS module interface for wired detectorsThe Jablotron JA-111H BUS module is designed to connect a wired detector to the alarm system.The module communicates a is powered by BUS from the central unit. The module is available as a PCB and can be installed in the wired detector. It provides one NC or one NO input. It allows the user to set a minimum trigger time (0.5s, 1s, 2s, or 5s)- Power supply: via the BUS of the central unit , 12V (9 - 15V)- Standby power consumption: 2 mA- Maximum standby current consumption of the connected detector: 50 mA- Dimensions: 22 x 27 x 14 mm- Safety class 2 in accordance with EN 50131-1, EN 50131-3- Environment in accordance with EN 50131-1, EN 50131-3: II, indoor- Operating temperature: -10 to 40 °C
€39,00
Jablotron JA-111H TRB connection module wired detector
JA-111H TRB Wired detector connection moduleThe JA-111H TRB module is an innovation of the JA-111H product. The innovation consists in reducing the size, lengthening the connecting wires to 30 cm, adding a TRB input and smaller changes in the internal settings.The JA-111H TRB module is designed to connect any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and supply it with power. This built-in module can be integrated directly into the detector. *One input of the module features a fixed sabotage signal, the second input reports an alarm signal and the third input is used to report an error of a connected device or a special "Masking" signal (for detectors with an anti-masking function ).*The module can also be used to connect a blind detector CT-01.*The module can be used to control programmable PG outputs.*It supports setting a minimum activation time for alarm activation (0.1 s - 300 s). *The detector features both status and impulse activation. *The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system.
€38,80
Jablotron JA-111H-AD BUS module for system control.
Jablotron JA-111H-AD BUS module for system controlThe Jablotron JA-111H-AD BUS module for system control is designed to be placed inside an external control device (with contact outputs) and provides a power supply for that device. The module has a status response (reports its on and off).- Power supply via BUS 12 V (9 ... 15 V)- Current consumption in standby mode * 5 mA- Current consumption for cable selection * 5 mA- Maximum allowable current of the connected control device 50 mA- Dimensions 22 x 27 x 14 mm- Class 2 according to EN 50131-1, EN 50131-3- Operating environment according to EN 50131-1: II. general indoors- Operating temperature -10 to + 40 ° C- Also complies with EN 50130-4, EN 55022
€95,11
Jablotron JA-111I Universal LED indicator RGB
Jablotron JA-111I Universal LED indicator RGB The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multi-color LED (red, green, blue and yellow). Product Info
€24,78
Jablotron JA-111M BUS magnetic detector mini
Jablotron JA-111M BUS magnetic detector miniThe Jablotron JA-111M magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations.The module communicates via digital bus. It is addressable and occupies one memory position in the control center.Product Info
€41,29
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"