Fire, gas and carbon monoxide detectors
-
Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglar and fire alarm)
Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglary and fire alarm)Jablotron's fully wireless smoke and heat detector protects home and hearth. The detector is used to detect fire hazards in the interior of residential or commercial buildings. It consists of a siren, which signals a fire alarm, either from the entire detector or from another fire detector in the system.Unique features.The smoke detector has a built-in siren that signals fire and burglar alarms. This notification is taken over by all detectors in the system!The detector communicates wirelessly and is powered by batteries (3x 1.5 V AA).If the detector is operated without being assigned to a central station or if communication with the central station is lost, it operates in an autonomous mode (EN 14604).The detector optically indicates a dangerous situation with an integrated light and siren. It is able to report acoustically:- A fire alarm detected by the detector itself- A fire alarm from the system (alarm triggered by another fire detector)- Other type of alarm (e.g., burglar alarm)- For alarms reported by the system, sections can be set for which the alarm is indicatedThe product contains two separate detectors - an optical smoke detector and a temperature detector. The optical smoke detector uses the principle of diffused light. It is very sensitive to particles, which are present in thick smoke. It is less sensitive to small particles produced by burning liquids such as alcohol, for example. Therefore, a heat detector is integrated, which responds better to a fire, where heat is rapidly developed with a small amount of smoke.The fire detectors must be installed by an experienced installer with a valid certificate issued by Jablotron. The detector is not designed for installation in industrial environments.Product Info
€189,84
-
Jablotron Ei208DW stand-alone CO detector with display
Ei208DW stand-alone CO detector with displayThis CO detector can be connected to the Jablotron 100 using the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector gives excessive carbon monoxide concentration both optically and acoustically an LED and acoustic signal using a built-in siren. This model also shows concentration data on the display.The detector is powered by an integrated lithium battery.Product Info
€218,91