Jablotron SA-220 roller door magnetic contact with floor contact Jablotron SA-220 roller door magnetic contact with floor contact.Wired magnetic contact specially designed for roller doors, garage doors etc.   The garage door contact for heavy doors is a magnetic contact that secures larger doors (e.g. garages). Unauthorized opening is detected and reported to the alarm center. The garage door contact for heavy doors is primarily installed on roller, sliding and up-and-over doors. The detector consists of a magnetic contact (reed) and a magnet. These are applied in parallel to each other. The power circuit of an NC opening detector is closed at rest. When the distance between reed and magnet increases, the power circuit is interrupted and an alarm signal is given. The detector is protected against tampering. Optimal location for mounting is in the middle of the driveway. The reed contact is mounted on the ground, the magnet - at a distance of approx. 20 mm - on the inside of the door. The garage door contact for heavy doors is very well suited for surface mounting. It is absolutely water- and dustproof (IP 68). Thanks to the extremely robust housing, the detector is resistant to damage caused by running over.   Product Info

Read more less

JA-111M-AN BUS magnetic detector mini anthracite The Jablotron JA-111M-AN magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations. The module communicates via digital bus. It is addressable and occupies one memory position in the control center. Product specifications: - Power supply 12 V (9 - 15 V).- Current consumption in standby mode 5 mA- Current consumption for cable selection 5 mA- Dimensions 55 x 27 x 16 mm- Operating temperature -10 to +40 ° C- Complies with EN 50130-4, EN 55022 Product video

Read more less

JA-111M-GR BUS magnetic detector mini gray The Jablotron JA-111M-GR magnetic detector mini is designed for window or doorway detection. It has a unique small design suitable for residential or commercial installations. The module communicates via digital bus. It is addressable and occupies one memory position in the control center. Product specifications: - Power supply 12 V (9 - 15 V).- Current consumption in standby mode 5 mA- Current consumption for cable selection 5 mA- Dimensions 55 x 27 x 16 mm- Operating temperature -10 to +40 ° C- Complies with EN 50130-4, EN 55022 Product video

Read more less