Hikvision
-
Hikvision DS-E08NI-Q1, Incl. 2TB SSD, Suitable for 8 IP cameras without PoE
Hikvision DS-E08NI-Q1, Incl. 2TB SSD, Suitable for 8 IP cameras without PoE Hikvision eSSD NVR is a new look at how NVRs will look. This recorder is very compact and energy efficient. The recorder is suitable for recording cameras up to 4MPThe views are maximum 1080p and has an outgoing bandwidth of 60Mbps. The eNVRs are available with PoE and without PoE Compact NVR with full functionality Due to its very compact size, the NVR can can be easily placed anywhere. In the meter cupboard, TV cabinet or directly behind the monitor. Despite its compact size, the NVR functions just like other Hikvision recorders. Including support for AcuSense detection Energy efficient, stable and shock resistant This NVR is thanks to the use of an SSD hard drive. This drive consumes much less energy than traditional hard drives. In addition, an SSD is also less sensitive to vibrations and damage. Which also makes the NVR extremely suitable for mobile solutions or temporary camera masts Completely silent Because the eSSD NVR does not have a fan. The SSD gets less warm than a traditional disk. Which means no extra cooling is needed. In addition, an SSD disk is also quieter than a traditional hard disk Environmentally friendly: The eSSD consumes approximately 44% energy compared to an equivalent NVR with a traditional hard drive. Due to its compact size, the recorder also takes up less space and weight during transport and the packaging in which the NVR is is supplied is completely biodegradable Available with PoE ports for plug&play operation. The eSSD NVR is available with and without PoE ports. The models with PoE ports are suitable for plug & play with Hikvision cameras HDMI output and Decoding capability for 4x 1080P or 2x 4MP, up to 60Mbps outgoing bandwidth. The data processing capacity of an eSSD is currently still somewhat lower than a traditional disk so that the eSSD has a longer lifespan. To make the NVR To keep it compact, it is also equipped with a somewhat lighter GPU. As a result, the specifications for the display capacity of the local HDMI output a bit lower than other NVR In the box: DS-E08NI-Q1, 2TB Lan cable Mouse Manual Specifications: Camera channels 4 Interface 1x HDMI Resolution HDMI 1 1920 x 1080 Simultaneous display 4 Compression H.265, H.264 Resolution 4MP, 3MP, 1080p, 720p Incoming bandwidth 60Mbps Outgoing bandwidth 60Mbps Synchronized playback 4 Ethernet 1x 10/100Mbps PoE ports No Including HDD 2TB Number of ports 1x USB 2x RS-232 No RS-485 No Power supply 12 VDC, 1.36 A Consumption <10W (without HDD) Working environment -10 to +45° Size 95mm × 97mm × 27mm
€439,00 €369,00
-
Hikvision DS-E08NI-Q1/8P, Incl. 2TB SSD, Suitable for 8 IP cameras 8x PoE
Hikvision DS-E08NI-Q1/8P, Incl. 2TB SSD, Suitable for 8 IP cameras 8x PoE Hikvision eSSD NVR is a new look at how NVRs will look. This recorder is very compact and energy efficient. The recorder is suitable for recording from cameras up to 4MPThe views are maximum 1080p and has an outgoing bandwidth of 60Mbps. The eNVRs are available with PoE and without PoE Compact NVR with full functionality Due to its very compact size, the NVR can can be easily placed anywhere. In the meter cupboard, TV cabinet or directly behind the monitor. Despite its compact size, the NVR functions just like other Hikvision recorders. Including support for AcuSense detection Energy efficient, stable and shock resistant This NVR is thanks to the use of an SSD hard drive. This drive consumes much less energy than traditional hard drives. In addition, an SSD is also less sensitive to vibrations and damage. Which also makes the NVR extremely suitable for mobile solutions or temporary camera masts Completely silent Because the eSSD NVR does not have a fan. The SSD gets less warm than a traditional disk. Which means no extra cooling is needed. In addition, an SSD disk is also quieter than a traditional hard disk Environmentally friendly The eSSD consumes approximately 44% energy compared to an equivalent NVR with a traditional hard drive. Due to its compact size, the recorder also takes up less space and weight during transport and the packaging in which the NVR is is supplied is completely biodegradable Available with PoE ports for plug&play operation. The eSSD NVR is available with and without PoE ports. The models with PoE ports are suitable for plug & play with Hikvision cameras HDMI output and Decoding capability for 4x 1080P or 2x 4MP, up to 60Mbps outgoing bandwidth. The data processing capacity of an eSSD is currently still somewhat lower than a traditional disk so that the eSSD has a longer lifespan. To make the NVR To keep it compact, it is also equipped with a somewhat lighter GPU. As a result, the specifications for the display capacity of the local HDMI output a bit lower than other NVR In the box: DS-E08NI-Q1/8P 2TB Power supply Mouse Lan cable Manual Specifications: Interface 1x HDMI Resolution HDMI 1 1920 x 1080 Simultaneous display 4 Compression H.265, H.264 Resolution 4MP, 3MP, 1080p, 720p Incoming bandwidth 60Mbps Outgoing bandwidth 60Mbps Synchronized playback 4 Ethernet 1x 10/100Mbps PoE ports 8x Including HDD 2TB Number of ports 1x USB 2x RS-232 No RS-485 No Power supply 12 VDC, 1.36 A Consumption <10W (without HDD) Working environment -10 to +55° Size 225mm × 122mm × 27mm
€589,00 €479,00
-
Hikvision DS-K1104M, Vandal proof card reader, MiFare
DS-K1104M, Vandal-proof card reader, MiFareThe DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.RS-485 vs. WiegandHikvision card readers such as the DS-K1104M feature connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485- Dust and waterproof- Mifare recognition and card reading
€149,00
-
Hikvision DS-K1104MK, Vandal-proof card reader with code keys, MiFare
DS-K1104MK, Vandal resistant card reader with code keys, MiFareThe DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.RS-485 vs. WiegandHikvision card readers such as the DS-K1104M feature connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting options and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485- Dust and waterproof- Mifare recognition and card reading
€189,00
-
Hikvision DS-K1107AE Access Control
DS-K1107AE | Access ControlImportant features Equipped with the 32-bit high-speed processor RS-485 and Wiegand (W26/W34) protocol and OSDP protocol Built-in EM card reader module (Frequency: 125KHz) Supports tamper alarm Built-in buzzer for identifying read status Online upgrade function Watchdog design to repair itself in case an exception occurs to ensure the long life of the reader
€49,00
-
Hikvision DS-K1107AM Card Reader MiFare
DS-K1107AM Card reader MiFareThe DS-K1107AM is a card reader from the access control line of Hikvision. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.Product Info
€59,00
-
Hikvision DS-K1107AMK Card reader MiFare + code keys
Hikvision DS-K1107AMK Card reader MiFare + code keysThe DS-K1107AMK is a card reader from the access control line of Hikvision which also features code keys to open a door or gate. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.Important features Features Brand: Hikvision Model: DS-K1107AMK ID settings: setting with the DIP switch on the motherboard Card reading distance: EM card: ≤100 mm (≤3.94″) Mifare card:≤50 mm (≤1.97″) Processor: 32-bit Keyboard: no keyboard (DS-K1107E and DS-K1107M) Keyboard with 12 keys (0~9, *, #) (DS-K1107EK and DS-K1107MK) Communication interface: RS-485 / Wiegand (DIP switch) Audio warning: beeper Power supply: 12VDC Power consumption: ≤2W LED indicator: power indicator; Status LED indicator Temper resistant: support Installation: Wall mounting with screws. The Corridor Box is not supported. Protection level: IP 65 Operating humidity: 10% to 90% (non-condensing) Operating temperature: -20°C to +65°C (-4°F to +149°F) Dimensions (L × W × H): 115 × 44 × 22 mm (4.53 × 1.73 × 0.87 inches) Color: Gray
€69,00
-
Hikvision DS-K1108AM Wiegand Mifare Built-in buzzer
Key Features:Supports RS-485, Wiegand (W26, W34) protocol and OSDP protocolSupports reading MifareTamper-proof functionBuilt-in buzzer for status indication
€69,00
-
Hikvision DS-K1108E card reader, EM
DS-K1108E card reader, EMThe DS-K1108E is a card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read EM cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.RS-485 vs. WiegandHikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485)- EM recognition and card reading
€79,86
-
Hikvision DS-K1108EK card reader with code keys, EM
DS-K1108EK card reader with code keys, EMThe DS-K1108EK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.RS-485 vs. WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Wiegand connection - RS-485 connection.Specifications:- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485)- EM recognition and card reading
€109,00
-
Hikvision DS-K1108MK card reader with code keys, MiFare
DS-K1108MK card reader with code keys, MiFareThe DS-K1108MK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option of reading EM or MiFare. This choice is made in the reader and cannot be changed via software. MiFare has a heavier encryption. If other EM solutions are already present, EM can also be selected.RS-485 vs. WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage of requiring more cores (7) to make the correct connection. After this, however, no more programming is required in the reader and everything can be set via the software.RS-485 has the advantage of requiring fewer cores (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. Also, with RS-485 you can work in a bus form instead of a star topology. With RS-485, however, for this reason it is necessary to give the readers the corresponding address via dipswitch. The sequence affects the setting possibilities and therefore require attention when making the setting. Readers seen as entering are numbered odd, readers used when exiting the protected zone are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- Led status indicator- RS485 and Wiegand(W26/W34) protocol;- Sabotage alarm;- Online upgrade function (when connected via 485)- MiFare recognition and card reading
€109,00
-
Hikvision DS-K1201MF, Fingerprint Card Reader MiFare
DS-K1201MF, Fingerprint Card Reader MiFarePlease note: for reading fingerprints and cards you need to use the recording module DS-K1F820-FThe DS-K1201MF is a fingerprint card reader from Hikvision's access control line. The reader is designed with a 32-bit high-speed processor and includes an optical fingerprint recognition module. It communicates with the access control system via the RS-485 protocol. The reader is IP65-rated, allowing it to be used outdoors.The reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.
€199,00
-
Hikvision DS-K1T341CMF Face Recognition stand alone unit (also fingerprint)
Hikvision DS-K1T341CMF Face Recognition stand alone unit With the DS-K1T341CMF Face Recognition Terminal from Hikvision, there is now a low-cost access control solution with built-in tag fingerprint reader and face recognition. The unit has its own database where 1500 face patterns, fingerprints and tags can be stored. The device works with a 2MP camera and special technology that ensures that photos of authorized persons are not responded to. However, it is possible to enter persons via photo. There are connections for USB, control of an electric lock, a door contact, a tamper alarm, a button to open the door from the inside and an RS-485 connection. Power is supplied by 12V DC. Product Info
€359,00
-
Hikvision DS-K2M061 Secure module
The DS-K2M060 Secure module is the control link between the access control terminal and the lock, including the magnetic door, lock, exit button and so on. It can be applied to keep the door closed when the door is damaged.In stand-alone modules and intercom applications, the switching of the lock can take place in the outpost or card reader. To prevent the switching from taking place on the non-secured side.Product specifications: Communicates with the access control terminal via RS-485 to execute commands from the terminal, including door open, door close, normally open and normally closed Collects the magnetic door signal, output button signal and tamper signal and sends them to the access control terminal Supports tamper alarm Supports RS-485 communication indicators to display communication status 4-channel DIP switch supporting ID number configuration Supports a Wiegand interface to connect a ??Wiegand card reader to enter/exist ??access control terminal by swiping the card Fire interface and exit button link Product Info
€67,00
-
Hikvision DS-KAB8103-IMEX rain cover for Hikvision 2 wire intercom
Hikvision DS-KAB8103-IMEX rain hood for Hikvision 2 wire intercomDS-KAB8103-IMEX rain hood for Hikvision 2-wire intercom.
€52,00 €43,00
-
Hikvision DS-KABD8003-RS1 Rain cover for Frame 1 Module
DS-KABD8003-RS1 Frame 1 Module rain cover Suitable for mounting on one module with protective cover shield Material: SECC Working Temperature: -40° C to +60° C (-40° F to 140° F) Working Humidity: 10% to 95% Dimensions(L × W × H): 122 × 116.4 × 58 mm (4.80" × 4.58" × 2.28") Weight: 298.9 g
€35,00
-
Hikvision DS-KABD8003-RS1/S Rain cap for the DS-KD-ACW1 stainless steel
A valuable addition regarding the Hikvision modular intercom systems. This rain cover is designed to protect one surface-mounted module from rain. No superfluous luxury for using the Hikvision modular intercom system without problems in just about any weather conditions. A nice addition to the Hikvision intercom modular product line. Product Info
€35,00
-
Hikvision DS-KABD8003-RS2 Rain hood 2 modules surface mount frame for DS-KD-ACW2
A valuable addition regarding the Hikvision modular intercom systems. This rain cover is designed to protect 2 modules together against rain. No superfluous luxury for using the Hikvision modular intercom system without problems in just about any weather conditions. A nice addition to the Hikvision intercom modular product line. Material: SECC Working Temperature: -40° C to +60° C (-40° F to 140° F) Working Humidity: 10% to 95% Dimensions(L × W × H): 224 × 116.4 × 58 mm (8.82" × 4.58" × 2.28") Weight: 500 g Product Info
€39,00
-
Hikvision DS-KABD8003-RS2/S Rain cap for the DS-KD-ACW2 stainless steel
Product details
€39,00
-
Hikvision DS-KABD8003-RS2/S Rain cap for the DS-KD-ACW3 stainless steel
Product details
€59,00
-
Hikvision DS-KABD8003-RS2/S Rain cap for the DS-KD-AFC2 & DS-KD-ACW2 stainless steel
Product details
€49,00
-
Hikvision DS-KABD8003-RS3 Rain cap for Frame 3 Modules
DS-KABD8003-RS3 Frame 3 Module Rain Canopy Is suitable for the installation of three door stations Material: SECC Working Temperature: -40° C to +60° C (-40° F to 140° F) Working Humidity: 10% to 95% Dimensions(L × W × H): 325.8 × 116.4 × 58 mm (12.83" × 4.58" ×2.28") Weight: 702.3 g
€45,90
-
Hikvision DS-KABD8003-RS3/S Rain cap for the DS-KD-ACW3 stainless steel
A valuable addition regarding the Hikvision modular intercom systems. This rain cover is designed to protect 3 modules together against rain. No superfluous luxury for using the Hikvision modular intercom system without problems in just about any weather conditions. A nice addition to the Hikvision intercom modular product line. Product Info
€45,90
-
Hikvision DS-KABH6320-T, Table Stand for the DS-KH6320 & DS-KH8520
Hikvision DS-KABH6320-T, Table stand for the DS-KH6320 & DS-KH8520Hikvision table stand for the DS-KH6320-WTE, DS-KH6320-WTE2 & DS-KH8520Specifications:Model :: DS-KABH6320-TMaterial :: SUS430, silica gelWorking temperature :: -10 °C to +55 °C (14 °F to 131 °F)Working humidity :: 10% to 90%Dimension :: 122 × 86 × 64 mm (4.80" × 3.39" × 2.52")Datasheet:
€39,00 €32,90
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"