jablotron
Jablotron JA-113E-AN BUS code control panel with RFID and keypad anthracite
JA-113E-AN BUS code control panel with RFID and keypad anthracite The Jablotron JA-113E-AN is a wired code control panel with control keys and an RFID card reader and is designed to control the alarm system. It contains one control segment and can be expanded as needed with up to 20 JA-192E control segments. By using the control segments, the system can be controlled in a simple way. The panel communicates via the BUS and is also powered by the BUS. In case of a power failure, the system will switch to an energy-saving function. It is possible to assign the code control panel to a zone and it occupies only one position in the alarm system. product specifications: Power supply: via the BUS of ed central station, 12 V (9 - 15V) Current consumption: AC 140 mA, during alarm 200 mA Standby: 15 mA maximum Dimensions: 102 x 98 x 33 mm Environment in accordance with EN 50131-1, EN 50131-3 II, indoors Operating temperature: -10 to 40 degrees This control panel can be combined with control panels from JA-101KR and JA-106KR series. Product video
€152,90
Jablotron JA-113E-GR BUS code control panel with RFID and keypad gray
JA-113E-GR BUS code control panel with RFID and keyboard gray The Jablotron JA-113E-GR is a wired code control panel with control keys and an RFID card reader and is designed to control the alarm system. It contains one control segment and can be expanded as needed with up to 20 JA-192E control segments. By using the control segments, the system can be controlled in a simple way. The panel communicates via the BUS and is also powered by the BUS. In case of a power failure, the system will switch to an energy-saving function. It is possible to assign the code control panel to a zone and it occupies only one position in the alarm system.Product specifications: Power supply: via the BUS of ed central station, 12 V (9 - 15V) Current consumption: AC 140 mA, during alarm 200 mA Standby: 15 mA maximum Dimensions: 102 x 98 x 33 mm Environment in accordance with EN 50131-1, EN 50131-3 II, indoors Operating temperature: -10 to 40 degrees This control panel can be combined with control panels from JA-101KR and JA-106KR series. Product video
€152,90
Jablotron JA-114E wired code control panel
Jablotron JA-114E wired code control panelThe Jablotron JA-114E is a code control panel with an LCD screen, buttons and an RFID card reader and is designed to control the alarm system. It contains one control segment and can be expanded as needed with up to 20 JA-192E control segments. By using the control segments, the system can be controlled in a simple way. The panel communicates through the BUS and is also powered by the BUS. In case of a power failure, the system will switch to an energy-saving function.It is possible to assign the code control panel to a zone and it occupies only one position in the alarm system. Menu options make managing the sections, zones, PG outputs and reports very easy.Product InfoThis control panel can be combined with control panels from JA-101KR and JA-106KR series.
€239,35
Jablotron JA-114E-AN BUS code control panel with LCD, keypad and RFID anthracite
JA-114E-AN BUS code control panel with LCD, keypad and RFID anthracite The Jablotron JA-114E-AN is a code control panel with an LCD screen, keypad and RFID card reader and is designed to control the alarm system. It contains one control segment and can be expanded as needed with up to 20 JA-192E control segments. By using the control segments, the system can be controlled in a simple way. The panel communicates through the BUS and is also powered by the BUS. In case of a power failure, the system will switch to an energy-saving function. It is possible to assign the code control panel to a zone and it occupies only one position in the alarm system. Menu options make managing the sections, zones, PG outputs and reports very easy.Product specifications: - Power supply: via the BUS of the central unit, 12 V (9 -15 V).- Current consumption: AC 15 mA- Standby: maximum 50 mA- RFID 125 kHz- Dimensions: 102 x 128 x 33 mm- Environment in accordance with EN 50131-1, EN 50131-3: II, indoor- Operating temperature: -10 to 40 °CThis control panel can be combined with control panels from JA-101KR and JA-106KR series. Product video
€239,36
Jablotron JA-114E-GR, BUS code control panel with LCD, keypad and RFID gray
JA-114E-GR, BUS code control panel with LCD, keypad and RFID gray The Jablotron JA-114E-GR is a code control panel with an LCD screen, keypad and RFID card reader and is designed to control the alarm system. It contains one control segment and can be expanded as needed with up to 20 JA-192E control segments. By using the control segments, the system can be controlled in a simple way. The panel communicates through the BUS and is also powered by the BUS. In case of a power failure, the system will switch to an energy-saving function. It is possible to assign the code control panel to a zone and it occupies only one position in the alarm system. Menu options make managing the sections, zones, PG outputs and reports very easy.Product specifications: - Power supply: via the BUS of the central unit, 12 V (9 -15 V).- Current consumption: AC 15 mA- Standby: maximum 50 mA- RFID 125 kHz- Dimensions: 102 x 128 x 33 mm- Environment in accordance with EN 50131-1, EN 50131-3: II, indoor- Operating temperature: -10 to 40 °CThis control panel can be combined with control panels from JA-101KR and JA-106KR series. Product video
€239,36
Jablotron JA-114HN BUS connection module with 4 inputs and outputs
Jablotron JA-114HN BUS connection module with 4 inputs and outputsA bus module, providing four wired inputs with adjustable EOL resistance values, four galvanically separated signal PG outputs and an additional power supply, protected with an electronic fuse. In addition to EOL-type resistance, resistor values can also be set for the inputs. The outputs are implemented as galvanically separated units (two each have a common C-terminal). The module occupies four positions in the control center and is equipped with one front and one rear tamper sensor.It is especially suitable for the renewal of wired alarms, where old detectors are used. They are also very often used to control multiple devices through the PG outputs. The auxiliary power supply allows
€202,41
Jablotron JA-115P Pro Bus PIR motion detector ceiling
Jablotron JA-115P Pro Bus PIR motion detector ceilingThe product is a bus system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movement in buildings. Compared to standard motion detectors of the JABLOTRON 100 series, this detector is designed for ceiling mounting. The product is installed on the ceiling and its guaranteed detection range is 360° with a detection radius of up to 5.5 m at a mounting height of 3.5 m. The resistance to false alarms can be set to two levels. The detector has a pulse response and occupies one position in the system. For automation functions, the detection sensitivity can be increased in the activated system state. A circular spacer (PLV-P-ST) was developed as a certified accessory for ceiling-mounted detectors, allowing the bus cable to be hidden in cases where it cannot be neatly hidden in the ceiling. Product Info
€99,04
Jablotron JA-116H BUS expander - 16 inputs
Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors with contact outputs . This expander makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detecors.This module can be installed directly into the housing of the control unit (JA-101K(R) and the JA-106k(R).
€202,41
Jablotron JA-118M BUS module for magnetic detectors - 8 inputs
Jablotron JA-118M BUS module for magnetic detectors - 8 inputsThe Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors. Installation in a JA-190PL universal multifunction box is recommended (or in a universal box).- Power supply via BUS 12 V (9 ... 15 V).- Current consumption in standby 5 mA- Consumption for cable selection 15 mA- Dimensions 50 x 38 x 14 mm- Class 2 according to EN 50131-1, EN 50131-3- Operating environment according to EN 50131-1: II- Operating temperature -10 to +40°C- Also complies with EN 50130-4, EN 55022
€128,11
Jablotron JA-120E-BK Touch control panel black
JA-120E-BK Touch control panel blackTouch control panel offer a unique combination of modern design with dual frequency reading technology. The front surface is made of special synthetic tempered glass that is not easily scratched by keys or other hard objects.Product specifications: Jablotron 100 control panel 'Touch'. Power consumption as backup (idle) 45 mA Maximum current consumption 95 mA RFID frequency 125 kHz MIFARE frequency 13.56 MHz Environment out of use Water and dust protection IP 55 Operating temperature -25 °C to +70 °C Dimensions 96 x 67 x 13.5 mm Weight 140 g
€274,67
Jablotron JA-120E-WH Touch control panel white
JA-120E-WH Touch control panel whiteTouch control panel offer a unique combination of modern design with dual frequency reading technology. The front surface is made of special synthetic tempered glass that is not easily scratched by keys or other hard objects.Product specifications: Jablotron 100 control panel 'Touch'. Power consumption as backup (idle) 45 mA Maximum current consumption 95 mA RFID frequency 125 kHz MIFARE frequency 13.56 MHz Environment out of use Water and dust protection IP 55 Operating temperature -25 °C to +70 °C Dimensions 96 x 67 x 13.5 mm Weight 140 g
€275,00
Jablotron JA-120N Module for opening the electric locks
Jablotron JA-120N Module for opening the electric locks Batteries are installed in the Jablotron JA-120N module, which provide the initial power impulse for opening the electric locks. JA-120N can be used anywhere, where it is difficult to install an external power source for operating electric locks. The module responds to the PG output ( freely programmable outputs) of the central unit, or can be activated using a button connected to the IN input (this can optionally be blocked by locking the section). The module is addressable and occupies one position in the system.
€117,53
Jablotron JA-120PB BUS combined PIR motion and glass breakage detector
Jablotron JA-120PB BUS combined PIR motion and glass breakage detectorThe Jablotron JA-120PB BUS combined PIR motion and glass break detector is suitable for the detection of human movement in a room and for the detection of breaking glass.This detector combines two sensors (PIR motion and acoustic glass breaking) in one housing.The detector occupies two memory positions in the system. The detector uses a PIR sensor for detection of human motion. Glass breakage is detected by a sensor GBS, which analyzes changes in pressure and sounds to detect the breaking of a glass window.Product Info
€132,05
Jablotron JA-120PC Bus PIR motion detector with camera
Jablotron JA-120PC Bus PIR motion detector with cameraThe Jablotron JA-120PC Bus PIR motion detector with a color camera that takes color pictures with a resolution of up to 640 x 480 pixels.The detector detects motion within the monitored area including a visual alarm confirmation. The detector is equipped with a flash and infrared illumination for taking photos at night. The camera takes digital color photos in JPEG format during an alarm.When motion is detected, the camera takes a series of photos. The photos are stored in the detector's internal memory and transferred to the control panel in compressed format. From there, the images are transferred outside the building.Product Info
€247,59
Jablotron JA-120PW Bus PIR / MW motion detector
Jablotron JA-120PW Bus PIR / MW motion detectorThe Jablotron JA-120PW Bus PIR / MW motion detector is used for human motion detection in a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection security.When motion is detected in the monitored area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, is the detector sends an alarm notification to the control center.Product Info
€148,55
Jablotron JA-120Z BUS extender 500m
JA-120Z BUS extender 500m Suitable for bus current stimulation, line length extension and galvanic isolation of the bus.The JA-120Z extends the BUS line by as much as 500m per terminal. 3 modules can be put in series allowing a total of even 2000m to be bridged. The kit consists of: a circuit board for the JA-120Z module and a JA-83PWR power source. The backup battery and plastic housing must be purchased separately.* Output current max. 2A* 2 independent bus output terminals - each provides 500m bus lengthThe product is offered as an electronic module with power supply unit JA-83PWR. We recommend installing the product in a plastic housing PLV-CP-L. The product is a component of the system JABLOTRON 100, is addressable and occupies one position in the system.* The galvanic separation of the output terminals serves for different ground potentials and the protective insulation of the bus* Up to 3 boosters can be arranged in series* Backup battery up to 18 Ah
€557,27
Jablotron JA-121E-BK outdoor keypad with reader black
JA-121E-BK outdoor keypad with reader blackTouch keypad offer a unique combination of modern design with dual-frequency reading technology. The front surface is made of special synthetic tempered glass that is not easily scratched by keys or other hard objects.Product specifications: Control unit BUS, black Synthetic tempered glass (against scratches) Operates by code and/or RFID (125KHz) RFID: Mifare frequency is 13.56MHz Power supply through the central unit (BUS) Water and dust resistant according to IP55 Dimensions: 96 x 67 x 19mm/170gr.
€314,39
Jablotron JA-121E-WH outdoor keypad with reader white
JA-121E-WH outdoor keypad with reader whiteTouch keypad offer a unique combination of modern design with dual frequency reading technology. The front surface is made of special synthetic tempered glass that is not easily scratched by keys or other hard objects.Product specifications: Control unit BUS, white Synthetic tempered glass (against scratches) Operates by code and/or RFID (125KHz) RFID: Mifare frequency is 13.56MHz Power supply through the central unit (BUS) Water and dust resistant according to IP55 Dimensions: 96 x 67 x 19mm/170gr.
€314,39
Jablotron JA-121T Converter module
Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the system bus JABLOTRON 100 to the serial line RS-485 and back.Used, for example, for connection to an intelligent house. Contains galvanic-isolation circuits dimensioned to a test voltage of 4 kV. Data is transmitted, if the status changes, or on demand. In passive mode, all data is sent only on demand. The module is addressable and occupies one position in the system.
€450,00
Jablotron JA-122E BUS outdoor access module with RFID
Jablotron JA-122E BUS outdoor access module with RFIDThe Jablotron JA-122E BUS outdoor access module with RFID can be used to activate a PG output that allows you to use local control of, for example, an electric lock. The module has a section with RFID to read a card or tag and optical status indication.Product Info
€198,06
Jablotron JA-123E BUS outdoor access module with RFID and keypad
Jablotron JA-123E BUS outdoor access module with RFID and keypadThe Jablotron JA-123E BUS outdoor access module with RFID and keypad can be used to activate a PG output that allows you to use local control of, for example, an electric lock or the security system.Product Info
€218,91
Jablotron JA-150A II Wireless Internal Siren
JA-150A II Wireless Internal SirenA wireless siren for indoor use, the JA-150A II is designed for audible alarm signaling, walk-in and walk-out delays, and PG output activation in the security system.Product Info
€173,33
Jablotron JA-150E wireless control panel
Jablotron JA-150E wireless control panelThe Jablotron JA-150E is a compact fully wireless 2-way code control panel. It can be connected to all Jablotron 100 series control panels.This compact code control panel includes an LCD screen, control buttons and an RFID reader. Integrated on the control panel are 4 buttons (A,B,C,D) that can be set to control sections or PG outputs.These functional buttons simultaneously serve as status indicators.Product InfoThis control panel can be combined with control panels from JA-101KR, JA-106KR and the JA-100KR series.
€280,60
Jablotron JA-150EM-DIN
JA-150EM-DINForget Toon, forget Anna, the Jablotron Electrometer allows any energy supplier to easily and clearly display usage.The module is intended for mounting on a DIN rail and is used for the informative display of the state of the electrometer, which is available to the customer in a clear way via the web control MyJablotron.The module contains a radio transmitter, which is intended for wireless transmission of the information from the electrometer via a control center to the MyJablotron portal. The pulse converter is powered directly from the network and contains the circuits for galvanic isolation, dimensioned for a test voltage of 4kV.The converter is designed for connection to a standard SO pulse output of the electrometer. This can be done on any new power meter!It can distinguish two tariffs (it can be connected to the day/night tariff conductor serving for operation from the collective remote control system). It also has an independent input, which can be used to secure the opening of the switch box door, for example.
€119,00
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"