Hikvision DS-3E0105P-E, 5 port PoE switch (4x PoE and 1x uplink)
Hikvision's dedicated CCTV switches are designed to optimally set up your network.
CCTV switches are equipped with a built-in range extender giving you as much as 250m range with your PoE power supply! You achieve these distances by using CAT6 cabling.
In addition, the switches are equipped with a 4kV surge protector. Because cameras are often mounted outside, it is very important that the switch does not short-circuit due to an overvoltage on one of the cables and bring down your camera network.
To properly process all of your camera's data packets without packet loss, a buffer is necessary. Hikvision CCTV switches have a buffer for this purpose, making the switch optimally equipped to bring camera images to the recorder without loss.
Specifications:
Network Ports: |
|
5 |
PoE Port: |
|
4, 10/100Mbps RJ45 ports |
Uplink Port: |
|
1, 100M Ethernet Port |
Standard |
Network Protocol: |
|
IEEE802.3,802.3u,802.3x, 802.3af, 802.3at |
Performance |
Switching Capacity: |
|
1Gbps |
Max. Forwarding Rate: |
|
0.74Mpps |
High Priority Ports: |
|
Port 1 |
Forwarding Mode: |
|
Store-and-forward |
MAC Address Table: |
|
1k |
Flow Control: |
|
IEEE802.3x full duplex |
Power Over Ethernet |
PoE Standard: |
|
IEEE802.3af, IEEE802.3at |
PoE Power Budget: |
|
58W |
Working Mode: |
|
Extend On:250m,10M,CAT 5e Extend Off:100m |
General |
Power Supply: |
|
51V DC, 1.25A |
Power Consumption: |
|
≤63W |
Surge Protection: |
|
4KV |
Working Temperature: |
|
Temperature: 0℃-40℃ |
Working Humidity: |
|
Humidity: 10%-90% , non-condensing |
Storage Temperature: |
|
Temperature: -40℃-70℃ |
Storage Humidity: |
|
Humidity: 5%-90% , non-condensing |
Weight: |
|
0.299kg |
Dimension: |
|
132mm* 93.3mm* 27.6mm |
Datasheet: