Accessories
-
Jablotron CT-01 Shutter detector
Jablotron CT-01 roller shutter detector The CT-01 is wired detector intended to detect the unauthorized movement of external shutters on houses or buildings. This detector is wired and can be connected with JA-150M or JA-81M to continue communication wirelessly.By using this detector, it is possible to optimally secure the premises against intruders. When the shutters are forced this will be detected and the alarm can react. Even before the intruder is inside! False alarms caused by the wind moving the shutters only slightly are avoided because alarms are only triggered when at least 3 pulses are received within 5 seconds.Product Info
€45,59
-
Jablotron JA-190X PSTN communication module
Jablotron JA-190X PSTN communication moduleThe JA-190X is a PSTN communication module for the JA-106KR. The module allows Contact ID DTMF, SIA DC-05 or SIA FSK with standard DC-03 protocol for control room communications and/or voice messages.Remote access to the system through the PSTN phone lineAccording to the settings of the central unit by F-Link software, i.e. the Communication/Voice menu and control SMS tabs, when you call the system from any/authorized phone the system will answer your call and ask you to enter your valid code. The communicator provides options with your voice. The structure of the voice menu changes with the restriction level of the enteredcode.If a new event occurs in the system, the call will be terminated.
€128,11
-
Jablotron AWZ-200 Backup power source 2A
Jablotron AWZ-200 Backup power source 2A- Power supply 230 V AC / 50 Hz - Output power 13.3-13.8 V DC- Transformer power 40 VA- Maximum continuous current 2A (with rechargeable battery)- Maximum output current 3A (peak, with rechargeable battery)- Short circuit protection electronic- Current protection (overload) electronic- Transformer current consumption at rated load 0.32 A- Capacity of rechargeable battery 7 Ah / 12 V- Dimensions 205x 235 x 95 mm- Weight without battery 2.9g
€121,85
-
Jablotron JB-161N-PLUG, smart socket with indicator LED
JB-161N-PLUG, Jablotron smart socket with indication LED Smart, wireless, two-way communicating plugs are a completely new solution for automation within the JABLOTRON 100+ system. The plug copies the selected PG output.
€149,33
-
Nedis TV Simulator Built-in Timer Black
Mimic the light of a real television and make it look like someone is at home. This TV simulator fills the room with bright light in different shades and changing order. This will deter burglars.Specifications: Color Anthracite Plug Type Euro / Type C (CEE 7/16) Customer target group Consumer market Package Contents: 1x TV simulator1x power adapter euro plug
€29,90
-
Power cable | Euro plug - Open cable end | 2.0 m | Black
Power cable | Euro plug - Open cable end | 2.0 m | BlackProduct descriptionDon't throw away an electrical appliance if only the strip cable is broken. Replace it with this Nedis® Euro power cable. The cable is a perfect spare for appliances that are not grounded, such as televisions and speakers.Features- Max capacity is 6 A- Ungrounded cable- Euro plug
€3,50
-
Jablotron JA-192Y GSM communicator for Jablotron Pro Central units
Jablotron JA-192Y GSM communicator for Jablotron Pro control panels. The control panel equipped with a JA-192Y communicates via a mobile network with a central monitoring station, allows operation and mobile applications via the web and sends alarm SMS messages and voice messages.Allows remote setup of the system using settings from the F-Link program.
€288,86
-
Jablotron JA-190Y GSM communicator
Jablotron JA-190Y GSM communicatorThe GSM communicator module is designed for the JA-100K and JA-100KR alarm panels. It serves as a backup and extension of the LAN communicator, which is part of the control center. When installed, it increases the reliability of data transmission to the JABLOTRON CLOUD and to the alarm centerThe JA-190Y communicator makes it possible:- To operate the system via a voice menu- To report events directly to a cell phone (SMS and voice messages) from the control center
€408,71
-
Jablotron JA-120Z BUS extender 500m
JA-120Z BUS extender 500m Suitable for bus current stimulation, line length extension and galvanic isolation of the bus.The JA-120Z extends the BUS line by as much as 500m per terminal. 3 modules can be put in series allowing a total of even 2000m to be bridged. The kit consists of: a circuit board for the JA-120Z module and a JA-83PWR power source. The backup battery and plastic housing must be purchased separately.* Output current max. 2A* 2 independent bus output terminals - each provides 500m bus lengthThe product is offered as an electronic module with power supply unit JA-83PWR. We recommend installing the product in a plastic housing PLV-CP-L. The product is a component of the system JABLOTRON 100, is addressable and occupies one position in the system.* The galvanic separation of the output terminals serves for different ground potentials and the protective insulation of the bus* Up to 3 boosters can be arranged in series* Backup battery up to 18 Ah
€557,27
-
Jablotron AN-868-2PIN External antenna
Jablotron AN-868-2PIN External antenna The external antenna AN-868 is used to extend the communication range of wireless components of Jablotron's security systems, which operate on the frequency of 868 MHz.A special construction of the PIFA type not only guarantees very good transmitting characteristics on different substrates, but also serves as sabotage detection in case of an interruption or short circuit in the power supply (this functionality must be supported by the connected component). The antenna can be mounted indoors or outdoors.The AN-868-2PIN version is connected via a 2-pin connector, which is used with the elements of older systems and the existing elements of the system JABLOTRON 100.
€66,02
-
Jablotron PLV-P-ST universal round ceiling mounting bracket
PLV-P-ST universal round ceiling mounting bracket Key features: Universal circular spacer for ceiling, for smoke and temperature detectors Used for smoke detectors and for PIR ceiling detectors. In both cases, the device is suitable for the bus option as a base, under which the bus wiring can be easily hidden In the case of wireless detectors as a base, it separates the antenna from the mounting surface and potentially improves signal range
€7,90
-
Jablotron JA-196J Dual RFID access tag
JA-196J Dual RFID access tag RFID frequency (125 kHz), MIFARE frequency (13.56 MHz)
€14,99
-
Jablotron JA-193PL-F-M-G, gray frame for mounting box wireless Designline PIR
Jablotron JA-193PL-F-M-G, grey frame for Designline wireless PIR mounting box.JA-193PL-F-M-G, grey frame for Designline wireless PIR mounting box
€3,93
-
Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR
Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIRJA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR
€3,93
-
Jablotron AWZ-300 Backup power source 3A
Jablotron AWZ-300 Backup power source 3AJablotron AWZ-300 Backup power source 3A- Power supply 230 V AC / 50 Hz - Output power 13.3-13.8 V DC- Transformer power 80 VA- Maximum continuous current 3A (with rechargeable battery)- Maximum output current 5A (peak, with rechargeable battery)- Short circuit protection electronic- Current protection (overload) electronic- Transformer current consumption at rated load 0.38 A- Capacity of rechargeable battery 17 Ah / 12 V- Dimensions 237 x 307 x 95 mm- Weight without battery 3.8kg
€148,71
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"