Accessories
-
Jablotron JA-110T BUS short circuit isolation module
Jablotron JA-110T BUS short circuit isolation moduleThe Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of BUS wiring. It is powered through the BUS of the control panel. It can be installed in a JA-190PL enclosure. It is not possible to assign it a zone (it does not take a position in the alarm system).Product Info
€62,10
-
Jablotron JB-110N Pro Bus PG power output module
Jablotron JB-110N Pro Bus PG power output moduleThe product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lights, fans, etc. The relay communicates via bus and is powered by the central controller's bus. It can be installed in a JA-19xPL installation box or a switch box.
€82,53
-
Jablotron AC-160-C wireless multifunctional power relay, flush-mounted model
Jablotron AC-160-C wireless multifunctional power relay, flush-mounted modelThe relay can also be installed as an independent device, responding to the activation of unidirectional wireless detectors of the JA-15x series, for example. In this case, the relay is activated according to the mode selected for the respective detector (choice of 5 modes): extended copy, impulse, status change, shutdown and blocking). It provides a switching contact relay with galvanic and safety isolation for switching a current load of 230V/16A. It occupies one position in the system. Rated supply voltage 100-230V, 50-60HzInternal power consumption at 230 V AC (min / max) 0.2 W / 0.7 WOperating frequency 868.1 MHz, Jablotron protocolInternal antennaContact load capacity - protection class II Max. switched voltage 250 V ACResistance load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 AHalogen lighting max. 1000 W Minimum switched-mode DC power supply 0.5 WDiameter of connected conductors max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2Ingress protection class IP20Dimensions 49 x 49 x 26 mmOperating temperature range -10 °C - + 40 °C, RH 75% non-condensingIn accordance with ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1Operating conditions ERC REC 70-03
€152,90
-
Jablotron JA-110N-DIN BUS DIN current output power module
Jablotron JA-110N-DIN BUS DIN current output power moduleThe Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module provides power to the relay output. It can be used, for example, to control lights, fans, etc. The relay output is programmable via the control panel.- Power supply 12 V bus (9 ... 15 V)- Current consumption during backup (relay open / closed) 5 mA / 45 mA- Current consumption for cable selection 45 mA- Rating relay (galvanically isolated) - Class II:- Maximum switching voltage 250 V AC / 24 V DC- Ohmic load (PF = 1) max.16- Inductive, capacitive load (PF = 0.4) max 8A- Halogen lighting max 1000 W DC 384 W- Minimum DC switching 0.5W- Twisted wires 2 x 1.5 mm2 max 1 x 2.5 mm2- Dimension 18 x 90 x 64 mm- Environment general indoor- Temperature, -10 to + 40 ° C- Enclosure IP-20- Complies with EN 50130-4, EN 55022, EN 60950-1 DIN rail EN60715
€119,89
-
Jablotron JA-111I Universal LED indicator RGB
Jablotron JA-111I Universal LED indicator RGB The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multi-color LED (red, green, blue and yellow). Product Info
€24,78
-
Nedis Anti-climb strip Set of 10 pieces Warning sticker included
Attach this anti-climbing strip to a wall, fence or gate and protect yourself from unwanted visitors. The anti-climb strip deters burglars, but is also very effective against cats, birds and other animals that like to climb over your fence or sit on it. Includes warning sign; in some regions the use of warning signs is required by law.Specifications: Contents 10 pcs. Length 450 mm Color Gray Material Plastic Package Contents: 10x anti-climb stripWarning sign with stickers
€18,00
-
Jablotron UR-01 Multi-function relay
Jablotron UR-01 Multifunction Relay You can store the Jablotron UR-01 Multifunction Relay in your tool bag to help you solve many tasks.It features switching contacts with galvanic and safety isolation for switching a 230VAC/16A load, which can be used in one of eight selectable options. The relay is designed for mounting on a DIN rail and its characteristics are set using switches under a cover.It offers eight functions:* Switching relay - Standard NO/NC relay.* Bistable relay - for example, for light control from multiple locations using buttons* Bistable relay with time limitation - for example, for controlling lights from multiple locations (however, the light will not stay on longer than during the set time)* Delayed shutdown - for example, for the run-out of a fan* Delayed switching on - starting an electric motor in star - delta mode.* Impulse by front flank - activation of a device for a specified time* Impulse by rear flank - for example, to turn on a fan after turning off the lights* Regular pulses - at a fixed interval, this will activate a device for a period of 10 min - for example, for regular heating of a heating element in the bathroom
€130,92
-
Jablotron AN-868 External antenna
Jablotron AN-868 External Antenna The external antenna AN-868 is used to extend the communication range of wireless components of Jablotron security systems, which operate on the frequency of 868 MHz.A special construction of the PIFA type not only guarantees very good transmitting characteristics on different substrates, but also serves as sabotage detection in case of an interruption or short circuit in the power supply (this functionality must be supported by the connected component). The antenna can be mounted indoors or outdoors.The AN-868 version is connected via a 3-pin connector, which is used in the newly developed components of the system JABLOTRON 100.
€66,02
-
Jablotron JA-110I BUS section / output PG activation indicator
Jablotron JA-110I BUS section / output PG activation indicatorThe Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the central unit by BUS. It is not possible to assign it a zone. (It takes no position in the alarm system.- LED ON current consumption: 5 mA- LED OFF current consumption: 2 mA
€40,11
-
Jablotron JS-7904 curtain lens
Jablotron JS-7904 curtain lensThe Jablotron JS-7904 curtain lens. This corridor lens has a length range of 25 meters. This lens is excellent for detecting moving heat sources in a focused beam (curtain) and can be placed in any Jablotron PIR.
€2,76
-
Jablotron JA-191Y LTE, GSM 4G communicator for Jablotron 100, 101 and 106
JA-191Y LTE, GSM 4G communicator for Jablotron 100, 101 and 106The LTE- 4G GSM rmodule is intended for use with the JA-100K, JA-101K and JA-106K alarm panels of the JABLOTRON 100+ series.
€474,73
-
Jablotron JA-192PL-A Multifunctional installation box
Jablotron JA-192PL-A Multifunctional installation box The Jablotron JA-192PL-A Multifunctional installation box for outdoor use.Product Info
€17,33
-
Jablotron AC-160-DIN Multi-function relay
Jablotron AC-160-DIN Multifunction Relay The wireless AC-160-DIN Multifunction Relay is a component of the JABLOTRON 100 system, but can also be installed as a stand-alone device without coupling to a control panel.It provides a switching contact relay with galvanic isolation and safety for switching 230 V / 16 A current loads. The relay can respond to the state of control panel PG outputs or for the activation of devices of the JA-15x series with uni-directional communication, read directly into the relay. The response can be selected from five modes - the standard NATURAL function (extended copy), IMPULS, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for direct manual status change. Allows you to work the firmware via a USB port. It is designed to be mounted on a DIN rail.
€165,06
-
Jablotron JA-121T Converter module
Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the system bus JABLOTRON 100 to the serial line RS-485 and back.Used, for example, for connection to an intelligent house. Contains galvanic-isolation circuits dimensioned to a test voltage of 4 kV. Data is transmitted, if the status changes, or on demand. In passive mode, all data is sent only on demand. The module is addressable and occupies one position in the system.
€450,00
-
Jablotron JA-120N Module for opening the electric locks
Jablotron JA-120N Module for opening the electric locks Batteries are installed in the Jablotron JA-120N module, which provide the initial power impulse for opening the electric locks. JA-120N can be used anywhere, where it is difficult to install an external power source for operating electric locks. The module responds to the PG output ( freely programmable outputs) of the central unit, or can be activated using a button connected to the IN input (this can optionally be blocked by locking the section). The module is addressable and occupies one position in the system.
€117,53
-
Jablotron JB-118N Pro Bus signal PG output module - 8 outputs
JB-118N Pro Bus signal PG output module - 8 outputsKey features: The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It is set using the DIP switch The device is not addressable (it does not occupy a position in the safety system)
€119,88
-
Nedis Dummy security camera Dome IP44 White
Indoor dummy camera helps deter intruders. It has a professional design with a built-in flashing LED, and is easy to mount with the included bracket.Specifications: Battery Type. 2x AA/R6 Camera design Dome Feature Plastic Housing IP rating IP44 Color White Package Contents: 1x dummy camera1 x installation materialManual
€23,90
-
Jablotron JA-110Z Connection module
Jablotron JA-110Z Connection Module The Jablotron JA-110Z Connection Module is designed for branching the bus of the system JABLOTRON 100. It is protected against attack by a pair of sabotage contacts. It is delivered in a suitable JA-190PL flush-mounted box.The contact module also contains 2x4 terminal boards, which are connected in parallel and allow the interconnection of independent branches. It occupies one position in the system.
€45,59
-
Jablotron JA-112M, Bus module for magnetic contacts, 2 inputs
JA-112M, Bus module for magnetic contacts, 2 inputs Up to 100 m of wiring can be connected to each input Inputs can be connected without balancing They can be individually or doubly balanced and can be connected to a function of the blind switch The module allows inverting the input or setting the minimum activation time to trigger the alarm (from 0.1 s to 300 s) The detector communicates with and is driven by the central controller's bus The detector is addressable and occupies two positions in the security system
€49,51
-
Jablotron JA-193PL-BOX-S Mounting box for Jablotron Designline BUS PIR
Jablotron JA-193PL-BOX-S Mounting box for Jablotron Designline BUS PIRJA-193PL-BOX-S Flush mount box for Jablotron Designline BUS PIR.
€9,84
-
Jablotron JA-159J, Pro Wireless Doorbell
JA-159J, Pro Wireless DoorbellKey features: The product is a wireless system device for the Jablotron Midway Pro and Essex Pro Button activation allows you to use the wireless call function, activate an emergency alarm or control devices The product occupies one position in the system
€59,00
-
Jablotron JA-193PL-F-M-W, white frame for mounting box wireless Designline PIR
Jablotron JA-193PL-F-M-W, white frame for Designline wireless PIR mounting box.JA-193PL-F-M-W, white frame for Designline wireless PIR mounting box
€3,93
-
Jablotron JA-193PL-BOX-M Mounting box for Jablotron Designline wireless PIR
Jablotron JA-193PL-BOX-M Mounting box for Jablotron Designline wireless PIRJA-193PL-BOX-M Flush mount box for Jablotron Designline wireless PIR.
€9,84
-
Jablotron CC-03 Installation cable for the system JABLOTRON 100, with additional wire pair
Jablotron CC-03 Installation cable for the system JABLOTRON 100, with additional wire pair The Cable CC-03 is used for easy installation of the bus line for the system JABLOTRON 100 with 2 other pairs of auxiliary conductors. 250 Mtr, each meter marked black.The colors of the conductors correspond to the color marking of the bus for JABLOTRON 100 and thus simplify the connection of the bus peripherals of the alarm system.
€565,53
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"