Jablotron JA-190PL Multifunctional installation housingThe Jablotron JA-190PL Multifunctional installation housing can be used for different modules of the JA-100 system.Product Info

Read more less

Jablotron JA-110Z-B BUS connection moduleThe Jablotron JA-110Z-B BUS connection module is designed to join BUS wires together in the JA-100 system and can be installed in the JA-190PL housing.Product Info

Read more less

JA-194PL Mounting box largeSupported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110Z, JA-110N, JA-111N, JA-150N, JA-151N, JA-118N, ...Product Info

Read more less

Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors with contact outputs . This expander makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detecors.This module can be installed directly into the housing of the control unit (JA-101K(R) and the JA-106k(R).

Read more less

Jablotron JB-111N BUS signal output module PGThe Jablotron JB-111N BUS signal output module PG is designed to make available a changeable output delay (8 A) with a NO or NC setting. An appropriate PG output is controlled via DIP switches (controlled 1 of 32 different DIP switches) . The module communicates and is powered by means of the bus connection on the central controller. The JA-111N can be installed in the JA-190PL housing. This module does not occupy additional space in the zone file.- Power supply: via the BUS of the central unit , 12V (9 - 15 V)- Power off: 5 mA- Power on current consumption: 25 mA- Maximum output relay load: up to 1 A/30 V DC- Minimum switching current: 10 mA - Environment in accordance with EN 50131-1, EN 50131-3: II, indoor- Operating temperature: -10 to 40 °C 

Read more less

Key features:- 4G Dialer for the Jablotron 103K and 107K systems.- Power source for the module 9-15 V DC (from the central unit)- Average current consumption 9 mA (depending on the strength of the GSM signal)- Current current consumption 720 mA- 2G (GSM, EDGE) 900/1800 MHz GSM communication band- 3G 900/2100 MHz (B8, B1) GSM communication band- 4G (LTE) 800/900/1800/2100/2600 MHz (B20,B8,B3,B1,B7) GSM communication band- I&HAS classification Safety grade 2/Environmental class II- Dimensions/weight 70mm x 37mm x 25mm/23gr.- Operational environment General solution for internal use- Operating temperature -10 °C to +40 °C- Average operating humidity 75 % RH, non-condensing- Compatible with RMT (ARC receiver) According to communication protocols

Read more less

Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the system bus JABLOTRON 100 to the serial line RS-485 and back.Used, for example, for connection to an intelligent house. Contains galvanic-isolation circuits dimensioned to a test voltage of 4 kV. Data is transmitted, if the status changes, or on demand. In passive mode, all data is sent only on demand. The module is addressable and occupies one position in the system.

Read more less

Jablotron JA-110Z Connection Module The Jablotron JA-110Z Connection Module is designed for branching the bus of the system JABLOTRON 100. It is protected against attack by a pair of sabotage contacts. It is delivered in a suitable JA-190PL flush-mounted box.The contact module also contains 2x4 terminal boards, which are connected in parallel and allow the interconnection of independent branches. It occupies one position in the system.

Read more less