Modules
-
Jablotron JA-190PL Multifunctional installation housing
Jablotron JA-190PL Multifunctional installation housingThe Jablotron JA-190PL Multifunctional installation housing can be used for different modules of the JA-100 system.Product Info
€5,37
-
Jablotron JA-110Z-C BUS connection module
Jablotron JA-110Z-C BUS connection moduleThe Jablotron JA-110Z-C BUS connection module is designed to join BUS wires together in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€9,51
-
Jablotron JA-150G-CO Wireless module for Ei208W CO detector
JA-150G-CO Wireless module for Ei208W CO detectorThe JA-150G-CO is a plug-in module for direct installation in a stand-alone CO detector, enabling wireless connection to the JABLOTRON 100 system. It transmits alarm information, detector activation and detector battery status to the control panel.It occupies one position in the system.This PCB allows you to wirelessly link the CO detector in the building with the Jablotron 100 system.The PCB fits easily into the housing and can use the CO detector's battery for its power supply.Product Info
€57,79
-
Jablotron JA-110Z-B BUS connection module
Jablotron JA-110Z-B BUS connection moduleThe Jablotron JA-110Z-B BUS connection module is designed to join BUS wires together in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€12,37
-
Jablotron JA-118M BUS module for magnetic detectors - 8 inputs
Jablotron JA-118M BUS module for magnetic detectors - 8 inputsThe Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors. Installation in a JA-190PL universal multifunction box is recommended (or in a universal box).- Power supply via BUS 12 V (9 ... 15 V).- Current consumption in standby 5 mA- Consumption for cable selection 15 mA- Dimensions 50 x 38 x 14 mm- Class 2 according to EN 50131-1, EN 50131-3- Operating environment according to EN 50131-1: II- Operating temperature -10 to +40°C- Also complies with EN 50130-4, EN 55022
€128,11
-
Jablotron JA-194PL Mounting box large
JA-194PL Mounting box largeSupported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110Z, JA-110N, JA-111N, JA-150N, JA-151N, JA-118N, ...Product Info
€35,08
-
Jablotron JA-116H BUS expander - 16 inputs
Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors with contact outputs . This expander makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detecors.This module can be installed directly into the housing of the control unit (JA-101K(R) and the JA-106k(R).
€202,41
-
Jablotron JB-111N BUS signal output module PG
Jablotron JB-111N BUS signal output module PGThe Jablotron JB-111N BUS signal output module PG is designed to make available a changeable output delay (8 A) with a NO or NC setting. An appropriate PG output is controlled via DIP switches (controlled 1 of 32 different DIP switches) . The module communicates and is powered by means of the bus connection on the central controller. The JA-111N can be installed in the JA-190PL housing. This module does not occupy additional space in the zone file.- Power supply: via the BUS of the central unit , 12V (9 - 15 V)- Power off: 5 mA- Power on current consumption: 25 mA- Maximum output relay load: up to 1 A/30 V DC- Minimum switching current: 10 mA - Environment in accordance with EN 50131-1, EN 50131-3: II, indoor- Operating temperature: -10 to 40 °C
€74,29
-
Jablotron JA-150N Wireless power module PG
Jablotron JA-150N Wireless power module PGThe Jablotron JA-150N Wireless Power Module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a selected PG output from the JA-100 system (PG1 to PG 32).- Power 0.5 W at 230 V AC- Output relay load: 16 A/250 V- 1 PG output: 3 x terminals C, NC, NO- Environment according to EN 50131-1, EN 50131-3: II, internal- Operating temperature -10 to + 40 ° C
€128,11
-
Jablotron JA-111R Radio module
Jablotron JA-111R Radio module The JA-111R radio bus module is used to connect all wireless devices of the JABLOTRON 100 system. To perfectly cover the monitored area, up to 3 JA-111R modules can be installed in a system.The electronic unit is installed in the front part of the cover and is equipped with a retractable terminal board, which allows easy connection of cables. Breakthrough holes for cables are located in the rear part.The module communicates with and is driven by the central controller's bus. The module is designed to be mounted outside the central controller and is used as the second or third panel in the system. If you need a radio module in the central controller, we recommend that you purchase a central controller with a radio module - the unit JA-10xKR-xxCompatible with: F-Link 1.4.0 or higherPower supply: via the central unit bus: 12 V (9...15 V)Consumption of backup (standby) mode: 25 mACurrent consumption (maximum) for cable selection: 25 mACommunication frequency: 868.1 MHzDimensions: 43 x 160 x 23 mm Classification: security grade 2, In accordance with EN 50131-1, EN 50131-3Environment: II. indoor, general, in accordance with EN 50131-1Operating temperature range: -10 °C to +40 °CIt also meets the requirements of: ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1Operating conditions: ERC REC 70-03
€331,01
-
Jablotron JA-114HN BUS connection module with 4 inputs and outputs
Jablotron JA-114HN BUS connection module with 4 inputs and outputsA bus module, providing four wired inputs with adjustable EOL resistance values, four galvanically separated signal PG outputs and an additional power supply, protected with an electronic fuse. In addition to EOL-type resistance, resistor values can also be set for the inputs. The outputs are implemented as galvanically separated units (two each have a common C-terminal). The module occupies four positions in the control center and is equipped with one front and one rear tamper sensor.It is especially suitable for the renewal of wired alarms, where old detectors are used. They are also very often used to control multiple devices through the PG outputs. The auxiliary power supply allows
€202,41
-
Jablotron JA-110Z-D Multipoint bus contact module
Jablotron JA-110Z-D Multipositional bus contact module This module is designed to connect the conductors of complex bus installations of the system JABLOTRON 100. It can be divided into two independent bus branches by disconnecting sweaters.It can be installed in the junction box JA-194PL, PLV-CP-M / L or directly in the central JA-106K.Product Info
€33,01
-
Jablotron JA-151N Wireless signal output module PG
Jablotron JA-151N Wireless signal output module PGThe Jablotron JA-151N Wireless Signal Output Module PG is a wireless PG power module (1 A/12/24 V DC required). It copies the status of a selected PG output from the JA-100 system (PG1 to PG32).A specific PG output can be selected via the circuit board with 5 DIP switches. This module does not occupy a position in the JA-100 system.- Power supply 12 - 24 V DC, not included as standard. - Output relay load: max. 1 A/30 V DC- 1 PG output: 3 x terminals C, NC, NO- Environment according to EN 50131-1, EN 50131-3: II, internal- Operating temperature -10 to + 40 ° C
€123,81
-
Jablotron JA-194Y, GSM 4G communicator for the JA-103K/107K
Key features:- 4G Dialer for the Jablotron 103K and 107K systems.- Power source for the module 9-15 V DC (from the central unit)- Average current consumption 9 mA (depending on the strength of the GSM signal)- Current current consumption 720 mA- 2G (GSM, EDGE) 900/1800 MHz GSM communication band- 3G 900/2100 MHz (B8, B1) GSM communication band- 4G (LTE) 800/900/1800/2100/2600 MHz (B20,B8,B3,B1,B7) GSM communication band- I&HAS classification Safety grade 2/Environmental class II- Dimensions/weight 70mm x 37mm x 25mm/23gr.- Operational environment General solution for internal use- Operating temperature -10 °C to +40 °C- Average operating humidity 75 % RH, non-condensing- Compatible with RMT (ARC receiver) According to communication protocols
€474,73
-
Jablotron JA-110T BUS short circuit isolation module
Jablotron JA-110T BUS short circuit isolation moduleThe Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of BUS wiring. It is powered through the BUS of the control panel. It can be installed in a JA-190PL enclosure. It is not possible to assign it a zone (it does not take a position in the alarm system).Product Info
€62,10
-
Jablotron JB-110N Pro Bus PG power output module
Jablotron JB-110N Pro Bus PG power output moduleThe product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lights, fans, etc. The relay communicates via bus and is powered by the central controller's bus. It can be installed in a JA-19xPL installation box or a switch box.
€82,53
-
Jablotron AC-160-C wireless multifunctional power relay, flush-mounted model
Jablotron AC-160-C wireless multifunctional power relay, flush-mounted modelThe relay can also be installed as an independent device, responding to the activation of unidirectional wireless detectors of the JA-15x series, for example. In this case, the relay is activated according to the mode selected for the respective detector (choice of 5 modes): extended copy, impulse, status change, shutdown and blocking). It provides a switching contact relay with galvanic and safety isolation for switching a current load of 230V/16A. It occupies one position in the system. Rated supply voltage 100-230V, 50-60HzInternal power consumption at 230 V AC (min / max) 0.2 W / 0.7 WOperating frequency 868.1 MHz, Jablotron protocolInternal antennaContact load capacity - protection class II Max. switched voltage 250 V ACResistance load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 AHalogen lighting max. 1000 W Minimum switched-mode DC power supply 0.5 WDiameter of connected conductors max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2Ingress protection class IP20Dimensions 49 x 49 x 26 mmOperating temperature range -10 °C - + 40 °C, RH 75% non-condensingIn accordance with ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1Operating conditions ERC REC 70-03
€152,90
-
Jablotron JA-110N-DIN BUS DIN current output power module
Jablotron JA-110N-DIN BUS DIN current output power moduleThe Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module provides power to the relay output. It can be used, for example, to control lights, fans, etc. The relay output is programmable via the control panel.- Power supply 12 V bus (9 ... 15 V)- Current consumption during backup (relay open / closed) 5 mA / 45 mA- Current consumption for cable selection 45 mA- Rating relay (galvanically isolated) - Class II:- Maximum switching voltage 250 V AC / 24 V DC- Ohmic load (PF = 1) max.16- Inductive, capacitive load (PF = 0.4) max 8A- Halogen lighting max 1000 W DC 384 W- Minimum DC switching 0.5W- Twisted wires 2 x 1.5 mm2 max 1 x 2.5 mm2- Dimension 18 x 90 x 64 mm- Environment general indoor- Temperature, -10 to + 40 ° C- Enclosure IP-20- Complies with EN 50130-4, EN 55022, EN 60950-1 DIN rail EN60715
€119,89
-
Jablotron JA-111I Universal LED indicator RGB
Jablotron JA-111I Universal LED indicator RGB The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multi-color LED (red, green, blue and yellow). Product Info
€24,78
-
Jablotron UR-01 Multi-function relay
Jablotron UR-01 Multifunction Relay You can store the Jablotron UR-01 Multifunction Relay in your tool bag to help you solve many tasks.It features switching contacts with galvanic and safety isolation for switching a 230VAC/16A load, which can be used in one of eight selectable options. The relay is designed for mounting on a DIN rail and its characteristics are set using switches under a cover.It offers eight functions:* Switching relay - Standard NO/NC relay.* Bistable relay - for example, for light control from multiple locations using buttons* Bistable relay with time limitation - for example, for controlling lights from multiple locations (however, the light will not stay on longer than during the set time)* Delayed shutdown - for example, for the run-out of a fan* Delayed switching on - starting an electric motor in star - delta mode.* Impulse by front flank - activation of a device for a specified time* Impulse by rear flank - for example, to turn on a fan after turning off the lights* Regular pulses - at a fixed interval, this will activate a device for a period of 10 min - for example, for regular heating of a heating element in the bathroom
€130,92
-
Jablotron JA-110I BUS section / output PG activation indicator
Jablotron JA-110I BUS section / output PG activation indicatorThe Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the central unit by BUS. It is not possible to assign it a zone. (It takes no position in the alarm system.- LED ON current consumption: 5 mA- LED OFF current consumption: 2 mA
€40,11
-
Jablotron JA-191Y LTE, GSM 4G communicator for Jablotron 100, 101 and 106
JA-191Y LTE, GSM 4G communicator for Jablotron 100, 101 and 106The LTE- 4G GSM rmodule is intended for use with the JA-100K, JA-101K and JA-106K alarm panels of the JABLOTRON 100+ series.
€474,73
-
Jablotron JA-192PL-A Multifunctional installation box
Jablotron JA-192PL-A Multifunctional installation box The Jablotron JA-192PL-A Multifunctional installation box for outdoor use.Product Info
€17,33
-
Jablotron AC-160-DIN Multi-function relay
Jablotron AC-160-DIN Multifunction Relay The wireless AC-160-DIN Multifunction Relay is a component of the JABLOTRON 100 system, but can also be installed as a stand-alone device without coupling to a control panel.It provides a switching contact relay with galvanic isolation and safety for switching 230 V / 16 A current loads. The relay can respond to the state of control panel PG outputs or for the activation of devices of the JA-15x series with uni-directional communication, read directly into the relay. The response can be selected from five modes - the standard NATURAL function (extended copy), IMPULS, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for direct manual status change. Allows you to work the firmware via a USB port. It is designed to be mounted on a DIN rail.
€165,06
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"