Modules
-
Jablotron JA-121T Converter module
Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the system bus JABLOTRON 100 to the serial line RS-485 and back.Used, for example, for connection to an intelligent house. Contains galvanic-isolation circuits dimensioned to a test voltage of 4 kV. Data is transmitted, if the status changes, or on demand. In passive mode, all data is sent only on demand. The module is addressable and occupies one position in the system.
€450,00
-
Jablotron JA-120N Module for opening the electric locks
Jablotron JA-120N Module for opening the electric locks Batteries are installed in the Jablotron JA-120N module, which provide the initial power impulse for opening the electric locks. JA-120N can be used anywhere, where it is difficult to install an external power source for operating electric locks. The module responds to the PG output ( freely programmable outputs) of the central unit, or can be activated using a button connected to the IN input (this can optionally be blocked by locking the section). The module is addressable and occupies one position in the system.
€117,53
-
Jablotron JA-110G-CO Connection module
Jablotron JA-110G-CO Connection module The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in a stand-alone Ei208W or Ei208DW CO detector, allowing the connection of the bus to the JABLOTRON 100 system. Product Info
€45,59
-
Jablotron JB-118N Pro Bus signal PG output module - 8 outputs
JB-118N Pro Bus signal PG output module - 8 outputsKey features: The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It is set using the DIP switch The device is not addressable (it does not occupy a position in the safety system)
€119,88
-
Jablotron JA-110Z Connection module
Jablotron JA-110Z Connection Module The Jablotron JA-110Z Connection Module is designed for branching the bus of the system JABLOTRON 100. It is protected against attack by a pair of sabotage contacts. It is delivered in a suitable JA-190PL flush-mounted box.The contact module also contains 2x4 terminal boards, which are connected in parallel and allow the interconnection of independent branches. It occupies one position in the system.
€45,59
-
Jablotron JA-112M, Bus module for magnetic contacts, 2 inputs
JA-112M, Bus module for magnetic contacts, 2 inputs Up to 100 m of wiring can be connected to each input Inputs can be connected without balancing They can be individually or doubly balanced and can be connected to a function of the blind switch The module allows inverting the input or setting the minimum activation time to trigger the alarm (from 0.1 s to 300 s) The detector communicates with and is driven by the central controller's bus The detector is addressable and occupies two positions in the security system
€49,51
-
Jablotron CT-01 Shutter detector
Jablotron CT-01 roller shutter detector The CT-01 is wired detector intended to detect the unauthorized movement of external shutters on houses or buildings. This detector is wired and can be connected with JA-150M or JA-81M to continue communication wirelessly.By using this detector, it is possible to optimally secure the premises against intruders. When the shutters are forced this will be detected and the alarm can react. Even before the intruder is inside! False alarms caused by the wind moving the shutters only slightly are avoided because alarms are only triggered when at least 3 pulses are received within 5 seconds.Product Info
€45,59
-
Jablotron JA-190X PSTN communication module
Jablotron JA-190X PSTN communication moduleThe JA-190X is a PSTN communication module for the JA-106KR. The module allows Contact ID DTMF, SIA DC-05 or SIA FSK with standard DC-03 protocol for control room communications and/or voice messages.Remote access to the system through the PSTN phone lineAccording to the settings of the central unit by F-Link software, i.e. the Communication/Voice menu and control SMS tabs, when you call the system from any/authorized phone the system will answer your call and ask you to enter your valid code. The communicator provides options with your voice. The structure of the voice menu changes with the restriction level of the enteredcode.If a new event occurs in the system, the call will be terminated.
€128,11
-
Jablotron JB-161N-PLUG, smart socket with indicator LED
JB-161N-PLUG, Jablotron smart socket with indication LED Smart, wireless, two-way communicating plugs are a completely new solution for automation within the JABLOTRON 100+ system. The plug copies the selected PG output.
€149,33
-
Jablotron JA-192Y GSM communicator for Jablotron Pro Central units
Jablotron JA-192Y GSM communicator for Jablotron Pro control panels. The control panel equipped with a JA-192Y communicates via a mobile network with a central monitoring station, allows operation and mobile applications via the web and sends alarm SMS messages and voice messages.Allows remote setup of the system using settings from the F-Link program.
€288,86
-
Jablotron JA-190Y GSM communicator
Jablotron JA-190Y GSM communicatorThe GSM communicator module is designed for the JA-100K and JA-100KR alarm panels. It serves as a backup and extension of the LAN communicator, which is part of the control center. When installed, it increases the reliability of data transmission to the JABLOTRON CLOUD and to the alarm centerThe JA-190Y communicator makes it possible:- To operate the system via a voice menu- To report events directly to a cell phone (SMS and voice messages) from the control center
€408,71
-
Jablotron JA-120Z BUS extender 500m
JA-120Z BUS extender 500m Suitable for bus current stimulation, line length extension and galvanic isolation of the bus.The JA-120Z extends the BUS line by as much as 500m per terminal. 3 modules can be put in series allowing a total of even 2000m to be bridged. The kit consists of: a circuit board for the JA-120Z module and a JA-83PWR power source. The backup battery and plastic housing must be purchased separately.* Output current max. 2A* 2 independent bus output terminals - each provides 500m bus lengthThe product is offered as an electronic module with power supply unit JA-83PWR. We recommend installing the product in a plastic housing PLV-CP-L. The product is a component of the system JABLOTRON 100, is addressable and occupies one position in the system.* The galvanic separation of the output terminals serves for different ground potentials and the protective insulation of the bus* Up to 3 boosters can be arranged in series* Backup battery up to 18 Ah
€557,27
-
Jablotron GS-208-CO Connection Module
Jablotron GS-208-CO Connection module The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the stand-alone Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a security unit or other system.The module provides galvanic isolation of the wired output of the entire detector. It provides the control panel with information about alarms and detector errors. Product Info
€49,51
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"